Just a thought: Out of everyone having problems, how many are connecting through NAT to their asterisk server? (client -> nat -> ... -> asterisk).
NAT firewalls time ports out after a certain amount of inactivity. I was having the same problem with my SIP analog adapter. I could fire it up and receive calls, but after a little while, it could no longer receive calls (yet asterisk would show them coming in). If I made a call out from the analog phone, I could again receive calls for a short while. Then it occurred to me that I probably didn't change my firewall rules after renumbering my asterisk box and it was a NAT issue. If anybody having this problem is running behind some sort of NAT device, try making your registration time rediculously low, such as 60s and see if it has an effect. (or try changing your rules, if possible) Just my .02 =) -Pat -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Michael Van Donselaar Sent: Monday, December 15, 2003 11:25 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] iaxclients missing calls On Mon, 15 Dec 2003 23:05:56 -0500 (EST), [EMAIL PROTECTED] wrote: >Hello All >When I open up iaxcomm, it registers fine with the asterisk server. If I >call into it, iaxcomm will ring; however if I leave iaxcomm sitting idle >for awhile (I haven't figured out exactly how long) it seems to miss >calls. I can see the calls coming in on the asterisk server but they >never ring through on iaxcomm. If I close it and reopen it, it takes >calls again fine. I thought I saw someone else who had experienced this >problem too but I don't recall seeing a solution. Any thoughts or >solutions? I'm trying to use iaxcomm in my every daybusiness but it's kind of >hard when I miss calls. It complicates things a bit. Although I used >iaxcomm as an example here I've experienced the same problem with DIAX. > >Thanks a bunch. >AJ Hi, AJ. It sounds like this is related to the other incoming ring issue. I'll check through the archives to verify, but I think a couple of other users were seeing this even soon after launching iaxComm or DIAX. I'm wondering if the iaxclient lib might be having a problem with registration renewal, or if it's a problem with event dispatching. Any other users seen this yet? (That is, seen incoming ring failures become more likely as uptime increases). The next time you get an ignored incoming call, could you try doing an iax2 debug on the cli? Do you see the same problem with DIAX when using IAX instead of IAX2? > > >_______________________________________________ >Asterisk-Users mailing list >[EMAIL PROTECTED] >http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users