On Feb 4, 2008 4:37 AM, Rob Hillis <[EMAIL PROTECTED]> wrote: > > Leave your zaptel config as it is. In zapata.conf, configure your channel > group as being channels 1-15,16-20. > > It does no harm at all to configure all the PRI channels in zaptel.conf. > Since Asterisk refers to zapata.conf when it comes to actual utilisation of > the channels, that's where you reduce the number of channels. > > voip crazy wrote: > > Dear all, > > I have got a PRI line with E1 20 channels, my question is: > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > > If this is my zaptel config for an E1 PRI line, Which would be the config > for a reduced PRI line for 15 channels? and for 20 channels? > > > Thanks in advance. > > VoIPcrazy
I don't think you would have any problems defining the entire E1 (30 b chans) in both config files. Provided you do not disable resetinterval, and your telco only signals the correct number of b chans as "up", you should be fine. With that configuration, one phone call to the telco "Yes, can you please turn up X more channels on my E1" should result in no user intervention on your side to utilize the new b chans as they are turned up. Thanks, Steve Totaro _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users