I got my Cisco PIX reconfigured as the below given. The issue "one-way" audio, still exists. Here is the call flow. The call comes on an inbound trunk to asterisk. Asterisk plays an IVR. When the user presses 5 it makes an outbound call "Dial(SIP/[EMAIL PROTECTED],30)" using the same inbound trunk. The dialing happens but there is one way audio. Please help/advise.
On 2/10/08, Adam KOSA <[EMAIL PROTECTED]> wrote: > > > permit udp any host 192.168.5.0 range 10000 20000 and then I didn't > > home users typically use /24 netmask. If this is the case, i don't > understand why do you write keyword host following a network address. > > either specify a valid host address, or write 192.168.5.0 255.255.255.0 > to specify the whole subnet. > > if the netmask isn't /24 then, of course the above 5.0 may be a valid > host address. > > regards > adam > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- Thanks and Regards Ravi Rajagopal Vaishnavy LLC 3910 N 153rd Ct, #113 Omaha, NE 68116 Ph: 402-880-5362 Fax: 209-755-6257 email: [EMAIL PROTECTED] Web: http://www.vaishnavy.com Under Bill S.1618 Title III passed by the 105th U.S. congress, this mail can not be considered spam as long as we include a way to be removed from our mailing list. Simply send us an e-mail with REMOVE in the subject and we will gladly REMOVE you from our mailing list.
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users