Eric, Looks like my Mitel does support ESF; I'll try changing it. One question before I do. If I change it right now, do you suppose my Telco automatically adapt? TELCO---T1---MITEL
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Wieling Sent: Tuesday, March 04, 2008 12:58 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Mitel SX-200 + * I would strongly recommend ESF/B8ZS. If you have a RED alarm that means the device does not see a line connected to it -- check cabling. Mark Best wrote: > Does anyone have any experience getting a Mitel SX-200 EL/ML PBX system > to work with *? > > I'm not getting inbound or outbound calls to work. (Inbound caller gets > line busy tone.) > > > > SETTINGS FROM MITEL: > > I built a Crossover cable and connected it like this: > > PSTN--T1--ASTRISK--T1--OLD MITEL > > -Crossover Cable Pin-out: > > 1 - 4 > > 2 - 5 > > 4 - 1 > > 5 - 2 > > Mitel Settings: > > Line Coding = B8ZS Framing = D4 (T1 Card 9109-021-001-NA) > > (My config: span=1,1,0,d4,b8zs & e&m=1-24) > > > > The card is a 24 channel T1 - not a PRI right? (T1 E&M Emulation Trunk: > 1) > > So does that mean I use E&M with Winkstart? > > (signalling=em_w) (is this spelt right?) > > (Wink setting is an assumption based upon a setting I saw in > the PBX called wink timer) > > > > Using a Sangoma A104D: > > zttool > > -GAVE "OK" on PSTN > > -Gave "RED" on MITEL > > Timing > > -Receiving Time from PSTN & Giving to the Mitel > > > > What debugging can I do to get more information? > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Consulting for Asterisk, Polycom, Sangoma, Digium, Cisco, LAN, WAN, QoS, T-1, PRI, Frame Relay, Linux, and network design. Based near Birmingham, AL. Now accepting clients worldwide. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users