Quoting Jaap Winius <[EMAIL PROTECTED]>: > Hi list, > > After successfully configuring Linksys SPA3000 and SPA3102 devices as > Asterisk PSTN gateways, the only thing I can't get working is the PSTN > Caller ID. The analog and SIP phones I've used can both display CIDs > for internal calls, while the analog model also displays CIDs > correctly when attached directly to the PSTN line. However, when PSTN > calls come in via the SPA device, all I see is the SPA device CID > associated with the PSTN line; not the CID of the incoming call. > > The only SPA settings I know of that are supposed to enable the > passing on of PSTN CIDs are the "PSTN CID For VoIP CID" option (under > PSTN Line), which AFAIK must be set to "yes," and the "Caller ID > Method" (under Regional), which I must set to "ETSI DTMI With PR", or > else my analog phone will not display any CIDs when attached to the > SPA's FXS port. Yet, these settings have never led to any positive > results, despite attempts with different firmware versions on both > devices. > > Can anyone help? > > Thanks, > > Jaap
Your caller ID is probably being over-ridden by the settings in your sip.conf file. Remove the caller ID from your PSTN section of the sip.conf, and the CID should be passed on from the POTS line. Tim Johnson _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
