Thanks for the reply but it could not solve my problem. > Did you modprobe ztdummy?
modprobe ztdummy modprobe: Can't open dependencies file /lib/modules/2.4.20-6um/modules.dep (No such file or directory) Can you please guide me what should I do for this? > It should return nothing(successfully). Confirm that it is loaded with > lsmod. > lsmod Module Size Used by Not tainted lsmod: QM_MODULES: Function not implemented > You'll also need to put that line in an init script so that it gets loaded > into memory again when you reboot. Can you please add a line how can I add that. > ztdummy uses info from the USB bus. I'm not sure USB bus available on the system. Since I could not modprob ztdummy > zaprtc uses the realtime clock of your pc. I want to setup my conference bridge running. Kannaiyan > > Hi, > > > > I don't have a zaptel device for conferencing. > > I read from the lists, that > > > > ztdummy and zaprtc need to be installed to get conferencing. > > > > I could able to compile successfully with ztdummy and when i receive > the > > call it says, > > > > -- Goto (13732,s,1) > > -- Executing MeetMe("SIP/-08118800", "1234") in new stack > > == Parsing '/etc/asterisk/meetme.conf': Found > > WARNING[245776]: File app_meetme.c, Line 162 (build_conf): Unable to open > > pseudo channel > > -- Playing 'conf-invalid' (language 'en') > > > > i read from the lists, that I need to install zaprtc to solve this > > problem. > > > > when i try to compile zaprtc, which i got from > > > > http://www.junghanns.net/asterisk/downloads/zaprtc.0.0.1.tar.gz > > > > It gives me the following error, > > > > zaprtc.c:1077: warning: implicit declaration of function `barrier' > > zaprtc.c:1078: warning: implicit declaration of function `cpu_relax' > > zaprtc.c: At top level: > > zaprtc.c:109: storage size of `rtc_irq_timer' isn't known > > zaprtc.c:719: storage size of `rtc_fops' isn't known > > zaprtc.c:107: warning: `DECLARE_WAIT_QUEUE_HEAD' declared `static' but > never > > defined > > make: *** [zaprtc.o] Error 1 > > > > Can anyone please guide me how to compile zaprtc. > > > > > > Did you modprobe ztdummy? > It should return nothing(successfully). Confirm that it is loaded with > lsmod. > > You'll also need to put that line in an init script so that it gets loaded > into memory again when you reboot. > > > ztdummy and zaprtc serve the same purpose, but go about it different ways. > They both provide a timing source. > ztdummy uses info from the USB bus. > zaprtc uses the realtime clock of your pc. > > ----- > Andrew Thompson http://aktzero.com/ > Your eyes are weary from staring at the CRT. You feel sleepy. Notice how > restful it is to watch the cursor blink. Close your eyes. The opinions > stated above are yours. You cannot imagine why you ever felt otherwise. > > > > > > --__--__-- > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > > End of Asterisk-Users Digest > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users