Thanks for that!! I'd written a script to do remote telnet/reboot commands, but maybe that's better! ...
Ok tried it... it didn't reboot the phone, but the phone does re-request : "syncinfo.xml" and "dialplan.xml" But not SIPDefault.cnf or anything else, and no reboot.. I'm intrigued though.. I didn't know I could send commands to the phone from Asterisk, so I wonder what else there are... Adrian -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Robert Lister Sent: 26 March 2008 13:04 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] UK GMT/BST settings On Wed, Mar 26, 2008 at 10:43:13AM -0000, Adrian Marsh wrote: > Ah ok, > > Those settings do seem to work (test phone was going to a different > tftpd server..) > > Anyone know if the Ciscos re-download SIPDefault.cnf periodically, or > only on boot ? As far as I can see, only on reboot. You will need to send the phones a SIP notify to get them to reboot. (or go round and reboot them all) from asterisk: (sip notify cisco-check-cfg xxxx) Where sip_notify.conf contains: [cisco-check-cfg] Event=>check-sync Content-Length=>0 Give it about 20 seconds after sending the notify and the phone should reboot. R. -- Robert Lister - London Internet Exchange - http://www.linx.net/ sip:[EMAIL PROTECTED] - inoc-dba:5459*710 - tel: +44 (0)20 7645 3510 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users