nat_received_processing: "1" yes sip.conf will make a diff.
bkw On Thu, 18 Dec 2003, Paul Mahler wrote: > In default.cnf for the 7960 I have > > # NAT/Firewall Traversal > nat_enable: 1 ; 0-Disabled (default), 1-Enabled > > > The sip.conf entry shouldn't matter, should it? I start a telnet session to > the phone. Then I run ping from the phone to the Internet. I can't ping > anything past the router. I can ping everything on the LAN. I'm doing this > before I've even started Asterisk. > > > > Paul Mahler > mail:[EMAIL PROTECTED] > phone: 650.207.9855 > fax: 877.408.0105 > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Brian West > Sent: Thursday, December 18, 2003 4:38 PM > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] Cisco 7960 - can't traverse NAT? > > using nat=yes in sip.conf? > > and nat processing on? on the 7960 that is. > > bkw > > On Thu, 18 Dec 2003, Paul Mahler wrote: > > > I have a 7960 running behind a firewall running NAT. From a telnet session > > to the 7960, I can't ping anything outside the subnet the 7960 is on, that > > is anything on the WAN side of the router. Other devices on the subnet get > > out to the WAN just fine. > > > > Has anyone else had this problem or know how to fix it? > > > > Thanks in Advance, > > > > Paul > > > > > > Paul Mahler > > mail:[EMAIL PROTECTED] > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
