Typo... ----- Original Message ----- From: "Andrew Thompson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, December 18, 2003 11:16 PM Subject: Re: [Asterisk-Users] SIP / X-ten Softphone
> As with any debugging, you should try steps seperately... > > ----- Original Message ----- > From: "PBX" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, December 18, 2003 10:42 PM > Subject: [Asterisk-Users] SIP / X-ten Softphone > > > [1005] > > type=friend > > secret=1005 > > host=dynamic > > mailbox=1005 > > context=default > Add username=1005 to this sip.conf definition. > > > > > X-Lite Softphone > > > > Network->Out Bound SIP Proxy: (IP of *) > > > > SIP Proxy->Default->Enabled: Yes > > SIP Proxy->Default->UserName: 1005 > > SIP Proxy->Default->Password: 1005 > > SIP Proxy->Default->Domain/Realm: (IP of *) > > SIP Proxy->Default->SIP Proxy: (IP of *) > > SIP Proxy->Default->Send Internal IP: Always > > Take a look at some screenshots of X-Lite configs. I remember there being a > line or two that wanted to have :5060 after the IP. > > As a side note, I gave up on X-Lite. I found it difficult to navigate the > configuration menus, and there was a background hum that isn't there if I > use sjphone, diax, or iaxcomm/iaxclient. ---- Andrew Thompson http://aktzero.com/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users