On Mon, 2008-03-31 at 23:07 +0100, Razza wrote: > On 31/03/2008, J. Oquendo <[EMAIL PROTECTED]> wrote: > YMMV Change to reflect your firmware (e.g. P003-07-4-xx) > > 8<-------- SNIP -------->8 > > I removed the following lines: > <loadInformation8 model="IP Phone > 7940">P003-07-4-00</loadInformation8> > <loadInformation7 model="IP Phone > 7960">P003-07-4-00</loadInformation7> > > And tried both of these: > <loadInformation6 model="IP Phone > 7965">term65.default</loadInformation6> > and > <loadInformation6 model="IP Phone > 7965">SIP45.8-3-4SR1S</loadInformation6> > > But again I get no further than /var/log/messages showing in.tftp > stops sending after XMLDefault.cnf.xml > > Any suggestions?
For a 7965, you might try loadinformation to be 335.. I have had to match up CCM tk.prod values to match on newer phones in the past to be what cisco uses in their internal database before I could get them to work. Although, leaving those lines out completely will work as well assuming they already have the SIP firmware loaded.. -Greg _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users