Yes, the Digium cards should support T1 CAS. Andrew Latham wrote: > Here I will say it.... http://xorcom.com > > > > On Mon, Mar 31, 2008 at 6:01 PM, Al lists <[EMAIL PROTECTED]> wrote: >> I'm looking to install a system with 80 FXS analog phones. >> At this time the only cost effective solution is using a 4 port T1 card and >> addit 600 channel bank. >> Has anyone tried this solution? any good documents beside >> http://www.voip-info.org/wiki/index.php?page=Asterisk+hardware+channel+bank+check >> as far as i know, addit 600 T1 interface is not PRI (please correct me if >> i'm wrong) its CAS robbed bit, will that work with new Digium quad T1 like >> TE410P ?( I prefer to use Digium if possible) >> The system is connected to the Telco through SIP trunk so all we have in >> terms of analog is local loop, Do we need to have echo cancel in this >> scenario ? >> Thanks! >> >> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > >
-- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 Mobile : (+1) (706) 338-8599 _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users