In article <[EMAIL PROTECTED]>, Jerry Geis <[EMAIL PROTECTED]> wrote: > What does it take to get ztdummy to work correctly? > > I have a new laptop HP HDX9200. I am running asterisk 1.4.19 and zaptel > 1.4.9.2 > Zaptel compiles fine. asterisk compiles fine. ztdummy loads asterisk runs. > Problem is playback() does not work. So then I stop zaptel, asterisk > runs and playback() now > works. However, meetme()'s dont work. I need ztdummy I'm pretty sure for > that. > > I am running Centos 5.1 with the latest kernel and fully updated. > > How can I get ztdummy to work? There are no cards in the laptop. > I typically dont run asterisk on a laptop - but thats what the situation > needed...
Jerry, the first thing to check is "cat /proc/interrupts" and see if there is an entry for rtc on IRQ 8. There should be, and the interrupt counts on there should be going up at approximately 1024 per second. What kernel version are you using? (uname -a) Cheers Tony -- Tony Mountifield Work: [EMAIL PROTECTED] - http://www.softins.co.uk Play: [EMAIL PROTECTED] - http://tony.mountifield.org _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users