--- "Nestor A. Diaz" <[EMAIL PROTECTED]> wrote:
> Mojo with Horan & Company, LLC wrote:
> > Nestor A. Diaz wrote:
> >
> >> 1. I use a queue with just on sip device, one
> call at a time, however
> >> and without reason just after some couple of
> hours the sip device show
> >> in use and then no calls are transfered from the
> queue to the sip
> >> device, i do a sip show inuse and this is the
> result:asterisk -rx "sip
> >> show inuse"
> >> * User name In use Limit
> >> 200 0 3
> >> * Peer name In use Limit
> >> 200 1/0 3
Did you try a "show channels" to see if there were
stale channels for peer 200?
I had the same problem you describe but it was due to
"hung" channels (used * 1.4.18.1 with rtp*timeout and
saw "inuse" peers during the pre-timeout periods even
though the agents weren't on a call).
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
