You are correct... my mistake. :-/ Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105
----- Original Message ----- From: "Drew Gibson" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Friday, June 6, 2008 1:36:13 PM GMT -06:00 US/Canada Central Subject: Re: [asterisk-users] Asterisk not picking up incoming calls from TDM400P Nope, didn't help. Doesn't the context declaration come *before* the channel assignment in zapata.conf? It's working that way in our main Asterisk server. regards, Drew Tim Nelson wrote: > It looks like you may be missing a context declaration right after your > "channel => 1" line. Try adding "context=incoming" right after that. > > Tim Nelson > Systems/Network Support > Rockbochs Inc. > (218)727-4332 x105 > > ----- Original Message ----- > From: "Drew Gibson" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <asterisk-users@lists.digium.com> > Sent: Friday, June 6, 2008 12:37:47 PM GMT -06:00 US/Canada Central > Subject: [asterisk-users] Asterisk not picking up incoming calls from TDM400P > > Hi, > > I am having some issues with a new server install in Singapore. > > Outbound calls work fine. > > Inbound calls are not picked up by Asterisk. > > Zaptel 1.2.25 and Asterisk 1.2.28 both built from source. > libpri installed > > wctdm and zaptel load without error > > Jun 6 23:34:03 fs01 kernel: [211138.372933] Zapata Telephony Interface > Registered on major 196 > Jun 6 23:34:03 fs01 kernel: [211138.372937] Zaptel Version: 1.2.25 > Jun 6 23:34:03 fs01 kernel: [211138.372943] Zaptel Echo Canceller: KB1 > Jun 6 23:34:03 fs01 kernel: [211138.383639] Freshmaker version: 73 > Jun 6 23:34:03 fs01 kernel: [211138.384053] Freshmaker passed register test > Jun 6 23:34:04 fs01 kernel: [211139.076180] Module 0: Installed -- AUTO > FXO (FCC mode) > Jun 6 23:34:04 fs01 kernel: [211139.275847] Module 1: Installed -- AUTO > FXO (FCC mode) > Jun 6 23:34:04 fs01 kernel: [211139.475514] Module 2: Installed -- AUTO > FXO (FCC mode) > Jun 6 23:34:05 fs01 kernel: [211139.675182] Module 3: Installed -- AUTO > FXO (FCC mode) > Jun 6 23:34:05 fs01 kernel: [211139.682518] Found a Wildcard TDM: > Wildcard TDM400P REV I (4 modules) > Jun 6 23:34:08 fs01 kernel: [211142.686305] Registered tone zone 18 > (Singapore) > Jun 6 23:34:14 fs01 kernel: [211149.412565] -- Setting echo registers: > Jun 6 23:34:14 fs01 kernel: [211149.412990] -- Set echo registers > successfully > Jun 6 23:34:14 fs01 kernel: [211149.413005] -- Setting echo registers: > Jun 6 23:34:14 fs01 kernel: [211149.413426] -- Set echo registers > successfully > Jun 6 23:34:14 fs01 kernel: [211149.413435] -- Setting echo registers: > Jun 6 23:34:14 fs01 kernel: [211149.413848] -- Set echo registers > successfully > Jun 6 23:34:14 fs01 kernel: [211149.413861] -- Setting echo registers: > Jun 6 23:34:14 fs01 kernel: [211149.414276] -- Set echo registers > successfully > Jun 6 23:34:28 fs01 kernel: [211163.107241] Zaptel Transcoder support > loaded > > > The one and only POTS line has been tuned with "fxotune and "fxotune -s" > has been run. > ztmonitor shows incoming ring (volume peaks at 3-4000) > > No, nothing, nadda, zero response from Asterisk. > > Can anyone suggest a tool to help find the gap between zaptel and Asterisk? > > regards, > > Drew > > > zaptel.conf:- > > fxsks=1-4 > ;(have tried fxsls=1-4 but no difference) > loadzone=sg > defaultzone=sg > > > zapata.conf:- > > [channels] > group=1 > context=incoming > callprogress=no > rxgain=2.0 > txgain=0.0 > immediate=no > usecallerid=yes > callerid=asreceived > signalling=fxs_ks > relaxdtmf=yes > pickupgroup=1 > faxdetect=incoming > > channel => 1 > > > indications.conf:- > > [general] > country=sg > > <---- Other countries snipped ---> > > [sg] > > ; Singapore section borrowed from > http://csusap.csu.edu.au/~whaase01/itc308/asterisk/indications.conf > description = Singapore > ; Singapore > ; Reference: > http://www.ida.gov.sg/idaweb/doc/download/I397/ida_ts_pstn1_i4r2.pdf > ; Frequency specs are: 425 Hz +/- 20Hz; 24 Hz +/- 2Hz; modulation > depth 100%; SIT +/- 50Hz > ringcadence = 400,200,400,2000 > dial = 425 > ring = 425*24/400,0/200,425*24/400,0/2000 ; modulation should > be 100%, not 90% > busy = 425/750,0/750 > congestion = 425/250,0/250 > callwaiting = 425*24/300,0/200,425*24/300,0/3200 > stutter = > !425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,!425/200,!0/200,!425/600,!0/200,425 > info = 950/330,1400/330,1800/330,0/1000 ; not currently in > use acc. to reference > dialrecall = 425*24/500,0/500,425/500,0/2500 ; unspecified in > IDA reference, use repeating Holding Tone A,B > record = 1400/500,0/15000 ; unspecified in > IDA reference, use 0.5s tone every 15s > ; additionally defined in reference > nutone = 425/2500,0/500 > intrusion = 425/250,0/2000 > warning = 425/624,0/4376 ; end of period > tone, warning > acceptance = 425/125,0/125 > holdinga = !425*24/500,!0/500 ; followed by holdingb > holdingb = !425/500,!0/2500 > > > [incoming] > ; Added Answer statement for troubleshooting > exten => s,1,Answer() > > include => office-incoming > include => internal > > [office-incoming] > ; OANDA Office incoming calls > ignorepat => 9 > exten => s,1,Wait,1 ; Waiting a little longer for CID > exten => s,n,Answer ; Answer the line > exten => s,n,Set(TIMEOUT(digit)=2) > exten => s,n,Set(TIMEOUT(response)=10) > exten => s,n,Set(TIMEOUT(absolute)=14400) > ;exten => s,n,Goto(ivr_menu) > > <----- rest of extensions.conf snipped -----> > > -- Drew Gibson Systems Administrator OANDA Corporation www.oanda.com _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users