Mariano Borgognone wrote: > Moises, we've already set debug level at 255 on unicall.conf and at > logger.conf we've enabled full log (notice,warning,error,debug,verbose). > > Has anyone experienced with a Siemens EWSD switch? > Anyone knows about to change R2 timers at unicall.conf ? > > Please any comment is welcome, thank you.. > Mariano.- > Randomly changing timers won't help. A call came in at 16:02:18, and your box should have responded almost immediately with a "seize ack" signal. It actually responded with this signal 12 seconds later (16:02:30). You haven't shown enough logging to get much of a clue why. > > ----- Original Message ----- > From: "Moises Silva" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <asterisk-users@lists.digium.com> > Sent: Saturday, June 07, 2008 1:27 PM > Subject: Re: [asterisk-users] Help-ASTERISK-MFCR2 > > > You need to enable loglevel=255 in unicall.conf and enable all the > levels of logging in logger.conf, otherwise the logs you post don't > say much. > > Moisés Silva > > On Fri, Jun 6, 2008 at 2:58 PM, Mariano Borgognone > <[EMAIL PROTECTED]> wrote: > >> Dears, >> I have problem ASTERISK with PSTN SIEMENS EWSD (MFC R2), I don´t receive >> call for PSTN, i don´t understand why..... please i need your help !!!! >> >> # MFC/R2 normalmente no usa CRC4 >> span=1,1,0,cas,hdb3 >> cas=1-15:1101 >> dchan=16 >> cas=17-31:1101 >> loadzone=us >> defaultzone=us >> >> >> [channels] >> usecallerid=yes >> hidecallerid=no >> callwaitingcallerid=yes >> threewaycalling=yes >> transfer=yes >> cancallforward=yes >> callreturn=yes >> echocancel=yes >> echocancelwhenbridged=yes >> echotraining=yes >> rxgain=0.0 >> txgain=0.0 >> group=1 >> callgroup=1 >> pickupgroup=1 >> immediate=no >> musiconhold=default >> protocolclass=mfcr2 >> protocolvariant=ar,10,10 >> protocolend=cpe >> group = 1 >> context= e1-incoming >> channel => 1-15 >> channel => 17-31 >> ;skip time slot 16 >> >> >> >> Here is the LOGS when I try do make calls >> >> Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 <- 0001 [1/ 1/Idle /Idle ] >> Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Detected >> Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Making a new call with CRN 32769 >> Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 1101 -> [2/ 2/Idle /Idle ] >> Jun 6 16:02:18 WARNING[5060]: chan_unicall.c:2644 handle_uc_event: >> Unicall/1 event Detected >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 <- 1001 [2/ 2/Seize ack /Seize ack ] >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Far end disconnected(cause=Normal, unspecified cause [31]) - >> state >> 0x2 >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event: >> Unicall/1 event Far end disconnected >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2930 handle_uc_event: CRN >> 32769 - far disconnected cause=Normal, unspecified cause [31] >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Call control(6) >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Drop call(cause=Normal Clearing [16]) >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Call disconnected(cause=Normal, unspecified cause [31]) - state >> 0x800 >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event: >> Unicall/1 event Drop call >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Call control(7) >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Release call >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 1001 -> [1/ 1000/Clear fwd /Seize ack ] >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Release guard expired >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Destroying call with CRN 32769 >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:2644 handle_uc_event: >> Unicall/1 event Release call >> -- Unicall/1 released >> Jun 6 16:02:30 WARNING[5060]: chan_unicall.c:627 unicall_report: MFC/R2 >> UniCall/1 Channel echo cancel >> Regards, Steve
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users