http://yabb.pulver.com/cgi-bin/yabb/YaBB.cgi?board=news;action=display;num=1072263468;start=0#0
I just signed up for an FWD account (I know I had one before, but I lost it.. :)
I've got it running through Asterisk - all working fine from a SIP standpoint. I can dial FWD numbers like 612/613/etc and everything works. However, if I dial *18005551212 or *408xxxxxxx (say, a USA number), I either get a fast busy or a "This service is only available to FreeWorld Dialup members".
Am I missing something? I signed up, got my password .. the sip is registered, firewall is open, no NAT, etc. I've tried a variety of combos in dialing/etc .. to no avail. Is my account pending some type of activation or such?
Possibly / likely related, it seems that the "*" doesn't work when I'm trying to set up the voicemail either. I'm using a Cisco 7960 (but remember, it's actually Asterisk linking us together). The 7960 does have a "*" dialplan, so that shouldnt be an issue.
Any ideas you guys have would be great!
Here's what my sip.conf looks like: register=99999:[EMAIL PROTECTED]/453
It shows that it's registered in sip sho reg..
[fwd] type=friend secret=password username=99999 fromuser=99999 ; I dont need this .. but worth a shot, tried with and without nat=yes ;I'm not behind nat, but I thought I'd try it anyway fromdomain=fwd.pulver.com ; Don't need this either. .but what the hay host=fwd.pulver.com canreinvite=no ; worth a shot, right? reinvite=no
I then have an extension that does:
exten => _7.,1,Dial(SIP/${EXTEN:[EMAIL PROTECTED])-d
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
