You could try to use libpri-1.4.7.1-llc-transmit-receive-patch.txt from http://bugs.digium.com/view.php?id=11595 to signal H324M in LLC IE too. Maybe the switch wants to have it in Bearer Capability and LCC (I once had such a switch).
Another reason could be that the telco blocks video calls. regards klaus PS: use the asterisk-video mailing lists Asterisk Users schrieb: > Hi all, > > I am trying to make an outbound video call to a mobile from asterisk. > however it keeps failing. > > I can make inbound calls from a mobile and view video. > I am using x-lite to initiate the outbound call, however I have tried using > the management interface as well (action: etc...) and result is the same. > > normal voice outbound calls work fine. > > Circuit is a q931 30 channel from telewest (virgin media). > > Any pointers would be appreciated. > > below is pri debug output and relevant conf entries. > > // BEGIN // > > -- Executing [EMAIL PROTECTED]:1] Goto("SIP/paul-081ff260", > "video_test_out|666|1") in new stack > > -- Goto (video_test_out,666,1) > > -- Executing [EMAIL PROTECTED]:1] Set("SIP/paul-081ff260", > "CHANNEL(transfercapability)=VIDEO") in new stack > > -- Executing [EMAIL PROTECTED]:2] Set("SIP/paul-081ff260", > "CHANNEL(userinformationlayer1)=38") in new stack > > -- Executing [EMAIL PROTECTED]:3] h324m_gw("SIP/paul-081ff260", > "[EMAIL PROTECTED]") in new stack > > [Jun 26 09:21:46] WARNING[7881]: channel.c:700 ast_best_codec: Don't know > any of 0x2000 formats > > -- Executing [EMAIL PROTECTED]:1] > h324m_call("Local/[EMAIL PROTECTED],2", > "[EMAIL PROTECTED]") in new stack > > -- Executing [EMAIL PROTECTED]:1] > Set("Local/[EMAIL PROTECTED],2", > "CHANNEL(transfercapability)=VIDEO") in new stack > > -- Executing [EMAIL PROTECTED]:2] > NoOp("Local/[EMAIL PROTECTED],2", "transfer=VIDEO") in > new stack > > -- Executing [EMAIL PROTECTED]:3] > Set("Local/[EMAIL PROTECTED],2", > "CHANNEL(userinformationlayer1)=38") in new stack > > -- Executing [EMAIL PROTECTED]:4] > NoOp("Local/[EMAIL PROTECTED],2", "ul1=38") in new stack > > -- Executing [EMAIL PROTECTED]:5] > Dial("Local/[EMAIL PROTECTED],2", > "Zap/g0/07525029025|40|tTkK") in new stack > > -- Making new call for cr 32771 > > -- digital call, setting user information layer 1 to 38 (0x26) > > -- Requested transfer capability: 0x18 - VIDEO > >> Protocol Discriminator: Q.931 (8) len=38 > >> Call Ref: len= 2 (reference 3/0x3) (Originator) > >> Message type: SETUP (5) > >> [04 03 88 90 a6] > >> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer >> capability: Unrestricted digital information (8) > >> Ext: 1 Trans mode/rate: 64kbps, circuit-mode >> (16) > >> Ext: 1 User information layer 1: H.223 and >> H.245 (38) > >> [18 03 a9 83 81] > >> Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive >> Dchan: 0 > >> ChanSel: Reserved > >> Ext: 1 Coding: 0 Number Specified Channel Type: 3 > >> Ext: 1 Channel: 1 ] > >> [6c 06 41 80 70 61 75 6c] > >> Calling Number (len= 8) [ Ext: 0 TON: Subscriber Number (4) NPI: >> ISDN/Telephony Numbering Plan (E.164/E.163) (1) > >> Presentation: Presentation permitted, user >> number not screened (0) 'paul' ] > >> [70 0c c1 30 37 35 32 35 30 32 39 30 32 35] > >> Called Number (len=14) [ Ext: 1 TON: Subscriber Number (4) NPI: >> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '07525029025' ] > >> [a1]CLI> > >> Sending Complete (len= 1) > > q931.c:2881 q931_setup: call 32771 on channel 1 enters state 1 (Call > Initiated) > > -- Called g0/07525029025 > > < Protocol Discriminator: Q.931 (8) len=10 > > < Call Ref: len= 2 (reference 3/0x3) (Terminator) > > < Message type: RELEASE COMPLETE (90) > > < [08 03 80 e4 04] > > < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 > Location: User (0) > > < Ext: 1 Cause: Invalid information element contents > (100), class = Protocol Error (e.g. unknown message) (6) ] > > < Cause data 1: 04 (4) > > -- Processing IE 8 (cs0, Cause) > > q931.c:3503 q931_receive: call 32771 on channel 1 enters state 0 (Null) > > -- Channel 0/1, span 1 got hangup, cause 100 > > NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null > > NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null > > -- Hungup 'Zap/1-1' > > == Everyone is busy/congested at this time (1:0/0/1) > > -- Executing [EMAIL PROTECTED]:6] > Hangup("Local/[EMAIL PROTECTED],2", "") in new stack > > == Spawn extension (video_test_out_context, dialcell, 6) exited non-zero > on 'Local/[EMAIL PROTECTED],2' > > == Auto fallthrough, channel 'Local/[EMAIL PROTECTED],2' > status is 'UNKNOWN' > > == Spawn extension (video_test_out, 666, 3) exited non-zero on > 'SIP/paul-081ff260' > > > > // END // > > > > > > extensions.conf: > > > > [video_test_out] > > exten => 666,1,Set(CHANNEL(transfercapability)=VIDEO) > > exten => 666,n,Set(CHANNEL(userinformationlayer1)=38) > > exten => 666,n,h324m_gw([EMAIL PROTECTED]) > > exten => 666,n,Hangup > > > > [video_test_out_context] > > exten => s,1,h324m_call([EMAIL PROTECTED]) > > exten => dialcell,1,Set(CHANNEL(transfercapability)=VIDEO) > > exten => dialcell,n,NoOp(transfer=${CHANNEL(transfercapability)}) > > exten => dialcell,n,Set(CHANNEL(userinformationlayer1)=38) > > exten => dialcell,n,NoOp(ul1=${CHANNEL(userinformationlayer1)}) > > exten => dialcell,n,Dial(Zap/g0/07xxxxxxxxx,40,tTkK) > > exten => dialcell,n,Hangup() > > exten => t,1,Goto(s,2) > > > > sip.conf: > > > > [general] > > context=sip_in > > allowoverlap=no > > bindport=5060 > > bindaddr=0.0.0.0 > > videosupport=yes > > disable=all > > allow=ulaw > > allow=alaw > > allow=h263+ > > ;allow=h263 > > ;allow=h263p > > allow=speex > > allow=gsm > > #include "/etc/pbx-tandil/sip.conf" > > #include "/etc/asterisk/sip_dps.conf" > > > > [paul] > > type=friend > > username=paul > > secret=georgina > > nat=never > > host=dynamic > > canreinvite=no > > allow=h263p > > -- > > Paul Verity > > > > > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > Register Now: http://www.astricon.net > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users