Hi Davey,
Just confirming that 192.168.1.1 to 192.168.1.150 is your existing lan range correct? (and not a new address range that you didn't configure properly in sbs2003 - also I'm assuming you are using Isa2004 as well correct?) Cheers, Dean ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sydney Web Hosting Sent: Wednesday, 2 July 2008 8:05 AM To: asterisk-users@lists.digium.com Subject: [asterisk-users] new install of asterisk appliance. Hi All, Ive just purchased an asterisk appliance. (AA50) ive connected the AA50 to my pc directly via Ethernet and logged in via 192.168.169.1 and I can log in fine. But then when I go into the asterisk gui > network to change the settings to get it on our LAN im having trouble. It just won't connect via the ip address ive assigned it of 192.168.1.15 Im on a windows network. (sbs2003 server) The changes Ive made in asterisk are as follows. (Under lan) IP = 192.168.1.15 DNS = 192.168.1.1 IP start range = 192.168.1.15 END range = 192.168.1.150 Im assuming that I have to change this info so I can access it via the network, rather than to have it connected to my pc all of the time. What am I doing wrong? Regards Davey.
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
