After upgrading to 1.4.21.1 I received some more verbose debug messages. Apparently the cause of the problem was that the following table columns MUST exist for a SIP peer to register.
ipaddr (i used varchar(32)) port (i used int unsigned) regseconds (i used bigint unsigned) This is apparently because realtime stores the IP address, port and registration time for a dynamic IP, realtime peer in the database along with the static accounting information. After adding those columns I was able to register fine with asterisk from kphone. Unfortunately the console commands 'sip show peers', 'sip show registry', etc. don't seem to work (is this normal?) ... but otherwise all is fine. Thanks to all who offered help while debugging this issue. Regards, Walter Stanish Owner / Director Occident Systems (+86 15808 700 801) _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users