On Mon, Aug 04, 2008 at 11:34:06AM +0500, Syed Nasruddin wrote:
>
>
>
>
> Hi,
>
> Can anyone help me on this. I am really stuck.again defining the problem
> briefly.:
>
> 1. Second New card TDM240P added to machine.
> 2. Only FXO modules i.e 24 FXO.
> 3. Asterisk detected all the ports successfully and when I run module
> reload chan_zap.so it list allthe FXO ports correctly.
> 4. when I can on any of the newly added lines there is a clear ring on
> the orginators phone while no activity detetcted by asterisk. It just
> keep quiet. It looks like call is not being detected by the card to my
> asterisk.
> 5. 4 port FXO card which was previously installed is functioning
> properly only this new added card is causing problem.
> 6. I have 12 new lines and only one of the lines is generating below
> mentioned logs in asterisk:
>
> == Starting post polarity CID detection on channel 18
> -- Starting simple switch on 'Zap/18-1'
> [Aug 4 11:09:29] NOTICE[12255]: chan_zap.c:6169 ss_thread: Got event 17
> (Polarity Reversal)...
> [Aug 4 11:09:31] WARNING[12255]: chan_zap.c:6232 ss_thread: CID timed
> out waiting for ring. Exiting simple switch
> -- Hungup 'Zap/18-1'
> == Starting post polarity CID detection on channel 17
> -- Starting simple switch on 'Zap/17-1'
> [Aug 4 11:09:35] ERROR[12256]: callerid.c:564 callerid_feed: fsk_serie
> made mylen < 0 (-1)
> [Aug 4 11:09:35] WARNING[12256]: chan_zap.c:6202 ss_thread: CallerID
> feed failed: Success
> [Aug 4 11:09:35] WARNING[12256]: chan_zap.c:6215 ss_thread: CallerID
> returned with error on channel 'Zap/17-1'
> [Aug 4 11:09:37] WARNING[12256]: chan_zap.c:6232 ss_thread: CID timed
> out waiting for ring. Exiting simple switch
> -- Hungup 'Zap/17-1'
If you connected a phone on the same line, at which point did it ring?
>
>
> Can anyone decipher this code???
The messages here are basically:
"The line polarity reversed. But it is
still on-hook. So it must be the telco signalling me that the caller ID
starts now (before the first ring).
...
Hey, I don't see any caller ID.
...
And there's no ring coming either. I guess no call's going to start now.
Something is terribly wrong. Goodbye!"
> What is happening?? Please give me some
> cluess to work on. In my Zapata.conf I have following two lines related
> to above logs:
>
> Cidsignalling= v23
> Cidstart = polarity
Does this combination make sense?
Do you use it for all the channels?
--
Tzafrir Cohen
icq#16849755 jabber:[EMAIL PROTECTED]
+972-50-7952406 mailto:[EMAIL PROTECTED]
http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir
_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
