Oh for....
Stared at that for ages not seeing it.... Thanks Felippe... ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Felippe Silvestre Sent: 07 August 2008 17:35 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] problem controlling dialplan order Try this: [local] exten => _00165011091[45][0-9],1,NoOp(I AM HERE) exten => _00165011091[45][0-9],n,Macro(setcli) exten => _00165011091[45][0-9],n,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _00165011091[45][0-9],n,Hangup The "[" before "0-9]" is needed. Felippe Silvestre ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Adrian Marsh Sent: Thursday, August 07, 2008 07:46 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [asterisk-users] problem controlling dialplan order Hi All, On a 1.4.15 system, I've a context as below, where I need to catch some specific US ranges and dial direct via SIP rather than a PSTN trunk. But the logic always goes via the International Trunk and I cant see why... [local] exten => _00165011091[45]0-9],1,NoOp(I AM HERE) exten => _00165011091[45]0-9],n,Macro(setcli) exten => _00165011091[45]0-9],n,Dial(SIP/${EXTEN:[EMAIL PROTECTED]) exten => _00165011091[45]0-9],n,Hangup ..... (same context) Catch local (UK) numbers exten => _0[1-9]X.,1,NoOp(Dialling UK number) exten => _0[1-9]X.,n,Macro(setcli) exten => _0[1-9]X.,n(jumpdial),Dial(SIP/+44${EXTEN:[EMAIL PROTECTED]) exten => _0[1-9]X.,jumpdial+101,Dial(${TRUNK}/${EXTEN},,Wr) exten => _0[1-9]X.,n+101,Busy ;Catch any (00xx) numbers exten => _00X.,1,NoOp(Dialling International number) exten => _00X.,n,Macro(setcli) exten => _00X.,n(jumpdial),Dial(SIP/+${EXTEN:[EMAIL PROTECTED]) exten => _00X.,jumpdial+101,Dial(${TRUNK}/${EXTEN},,Wr) exten => _00X.,n+101,Busy I've tried putting the Catch codes above into a sub-context, and then put an include into the [local], but it still dials via the Catch international... The odd thing is that in either, the show dialplan seems to suggest the correct order : '_00165011091[45]0-9]' => 1. NoOp(I AM HERE) [pbx_config] 2. Macro(setcli) [pbx_config] 3. Dial(SIP/${EXTEN:[EMAIL PROTECTED]) [pbx_config] 4. Hangup() [pbx_config] .... (some others) '_00X.' => 1. NoOp(Dialling International number) [pbx_config] 2. Macro(setcli) [pbx_config] [jumpdial] 3. Dial(SIP/+${EXTEN:[EMAIL PROTECTED]) [pbx_config] 104. Dial(${TRUNK}/${EXTEN}||Wr) [pbx_config] 206. Busy() [pbx_config] The page at voip-info isn't too clear in the differences between 1.2 and 1.4 (http://www.voip-info.org/wiki/view/Asterisk+config+extensions.conf+sort ing) so I'm not sure where I've gone wrong. Adrian Marsh
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
