now we're getting somewhere! anything above interrupt 15 will be interrupt sharing. bad! If you can get the cards assigned to 10 or 11, you should be in better shape.
Sean -----Original Message----- From: Victor Rini [mailto:[EMAIL PROTECTED] Sent: Monday, December 29, 2003 12:12 AM To: '[EMAIL PROTECTED]' Subject: [Asterisk-Users] RE: TDM Card loses Dialtone and Battery Andrew: I tried the asterisk -vvvc suggestion and I didn't get any messages when the card died. Here's /proc/interrupts before I take out the sound card: CPU0 0: 102777 IO-APIC-edge timer 1: 471 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 4 IO-APIC-edge rtc 14: 9159 IO-APIC-edge ide0 15: 6 IO-APIC-edge ide1 17: 1995769 IO-APIC-level wcfxo, wcfxo 18: 341396 IO-APIC-level wcfxs 19: 0 IO-APIC-level EMU10K1 20: 3390 IO-APIC-level eth1 21: 8652 IO-APIC-level eth0 22: 788 IO-APIC-level eth2 NMI: 0 LOC: 102728 ERR: 0 MIS: 0 and after: CPU0 0: 14903 IO-APIC-edge timer 1: 2 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 8: 4 IO-APIC-edge rtc 14: 7469 IO-APIC-edge ide0 15: 6 IO-APIC-edge ide1 17: 111534 IO-APIC-level wcfxo 18: 111626 IO-APIC-level wcfxo 19: 104013 IO-APIC-level wcfxs 20: 680 IO-APIC-level eth1 21: 509 IO-APIC-level eth0 22: 41 IO-APIC-level eth2 NMI: 0 LOC: 14855 ERR: 0 MIS: 0 About load: almost impossible to tell. I was sshed into the server and running top - top was showing the system 100% idle. Then I hit a download link and bang, the card died. This is all pretty academic at this point - I think Tilghman found the problem for me. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users