I've got a problem that I hope someone here can shed some light on. It seems that in any calls going over Zap channels (either with a FXO card or PRI card), inbound audio is constantly monitored for DTMF tones, and then these tones are regenerated back in the audio stream either within * if the endpoint is set for inband dtmfmode, or sent out-of-band for the endpoint to regenerate.
I have two applications where this has disasterous results: 1. Connecting to another system that does a lot of DTMF signaling 2. Trying to use an iaxmodem and hylafax to receive faxes. The DTMF detection code easily falses and at least mutes the audio. I realize there are certain things (like the IVR) that require the DTMF detection; but on calls from the zap channel to an endpoint, I can't have it muting the audio, and potentially regenerating the tones. Perhaps this could be configurable per extension entry? I think I recall seeing something that looked for the fax initial tone, and would at least disable any echo cancellation - does that also disable DTMF regeneration? I appreciate any help or pointers! Joe ____________________________________________________________ Click to go wireless with your computer, ultra fast speed. http://thirdpartyoffers.netzero.net/TGL2231/fc/Ioyw6ijmWbww9f2hhX4f2TcPxLtgcLJ4DlAvmab8VmG43fIiATJTRp/ _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
