> > Did you check sip.conf to make sure that the port is correctly set to 5060? > > Please show the output of Cli> sip show peer <peernumber> and the contents of > your SEP<MAC>.cnf file. > > Dave >
sip.conf has : bindport=5060 ; UDP Port to bind to (SIP standard port is 5060) bindaddr=X.X.X.X ; ress to bind to (0.0.0.0 binds to all) srvlookup=yes ; Enable DNS SRV lookups on outbound calls One extension cisco in sip.conf is: [402] type=friend dtmfmode=rfc2833 username=402 secret=XXXXXXX disallow=all allow=ulaw allow=alaw host=dynamic context=local-sip nat=yes canreinvite=no callerid="John Smith" <402> sip show peer 402 * Name : 402 Secret : <Set> MD5Secret : <Not set> Context : smvoice-sip Subscr.Cont. : <Not set> Language : > AMA flags : Unknown CallingPres : Presentation Allowed, Not Screened Callgroup : Pickupgroup : Mailbox : VM Extension : asterisk LastMsgsSent : 32767/65535 Call limit : 0 Dynamic : Yes Callerid : "John Smith" <402> Expire : -1 Insecure : no Nat : Always ACL : No CanReinvite : No PromiscRedir : No User=Phone : No Trust RPID : No Send RPID : No DTMFmode : rfc2833 LastMsg : 0 ToHost : Addr->IP : (Unspecified) Port 0 Defaddr->IP : 0.0.0.0 Port 5060 Def. Username: 402 SIP Options : (none) Codecs : 0xc (ulaw|alaw) Codec Order : (ulaw,alaw) Status : Unmonitored Useragent : Reg. Contact : SIP Config file: # SIP Configuration Generic File (start) # Proxy Server proxy1_address: "X.X.X.X" proxy2_address: "X.X.X.X" proxy3_address: "X.X.X.X" proxy4_address: "X.X.X.X" proxy5_address: "X.X.X.X" proxy6_address: "X.X.X.X" # Line 1 Settings line1_name: "402" ; Line 1 Extension\User ID line1_displayname: "402" ; Line 1 Display Name line1_authname: "402" ; Line 1 Registration Authentication line1_password: "402" ; Line 1 Registration Password # Line 2 Settings line2_name: "403" ; Line 2 Extension\User ID line2_displayname: "403" ; Line 2 Display Name line2_authname: "403" ; Line 2 Registration Authentication line2_password: "403" ; Line 2 Registration Password # Emergency Proxy info proxy_emergency: "" proxy_emergency_port: "5060" # Backup Proxy info proxy_backup: "" proxy_backup_port: "5060" # Outbound Proxy info outbound_proxy: "" outbound_proxy_port: "5060" # NAT/Firewall Traversal nat_enable: "0" nat_address: "" voip_control_port: "5060" start_media_port: "16384" end_media_port: "32766" nat_received_processing: "1" # Phone Label (Text desired to be displayed in upper right corner) phone_label: "JDA 402 " ; Has no effect on SIP messaging # Time Zone phone will reside in time_zone: EST # Telnet Level (enable or disable the ability to telnet into this phone telnet_level: "0" ; 0-Disabled (default), 1-Enabled, 2-Privileged # Phone prompt/password for telnet/console session phone_prompt: "Go Away" ; Telnet/Console Prompt phone_password: "cisco" ; Telnet/Console Password proxy_register: 1 # Enable_VAD (1-enabled, 0-disabled) enable_vad: "0" # Network Media Type (auto, full100, full10, half100, half10) network_media_type: "auto" user_info: phone # URL for external Directory location #logo_url: "http://10.0.1.3/10-20logo.bmp" ; URL for branding logo to be used on phone display # SIP Configuration Generic File (stop) _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- AstriCon 2008 - September 22 - 25 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users