Please send the TFTP log after using the regular factory reset method I described.
Thanks Dave -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sasa Sent: Thursday, October 09, 2008 10:46 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] Cisco 7906g & SIP Hi Dave, I have tried restore to factory default value (as you have recommended to me) but without success, however also with only files: SEP<MAC>.conf file contents of the cop file ..but the result isn't changed ! Thanks in advance. ------ Salvatore. ----- Original Message ----- From: "David Gibbons" <[EMAIL PROTECTED]> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users@lists.digium.com> Sent: Thursday, October 09, 2008 2:59 PM Subject: Re: [asterisk-users] Cisco 7906g & SIP > Sasa, > > Sometimes I have to do a hard reset of the phone in order to get it to > load the SIP firmware, even when the load file is specified in the > SEP<MAC>.conf file. > > Make sure that only the contents of the cop file and the SEP<mac>.cnf file > are present in your tftp root. Then unplug the phone and press and hole > the # key. Plug the phone back in, still holding the # key. When the line > buttons begin turn on and off in sequence, press 123456789*0#. > > This will factory reset the phone and should cause it to check the > termxx.default.loads file for the proper image. It will then read the SIP > image name from that file and flash itself with the SIP image. > > Dave > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Sasa > Sent: Thursday, October 09, 2008 8:51 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Cisco 7906g & SIP > > Hi Dave, > the cmterm-7911_7906-sip.8-0-4sr1.cop is a compressed file and on the > inside > has: > > apps11.1-1-3-15.sbn > cnu11.3-1-3-15.sbn > copstart.sh > cvm11sip.8-0-3-16.sbn > dsp11.1-1-3-15.sbn > jar11sip.8-0-3-16.sbn > load307 > load369 > SIP11.8-0-4SR1S.loads > term06.default.loads > term11.default.loads > > I use Cisco7941 without callmanager software but only with SIP support. > Thanks. > > ------ > > Salvatore. > > > > ----- Original Message ----- > From: "David Gibbons" <[EMAIL PROTECTED]> > To: "Asterisk Users Mailing List - Non-Commercial Discussion" > <asterisk-users@lists.digium.com> > Sent: Thursday, October 09, 2008 2:30 PM > Subject: Re: [asterisk-users] Cisco 7906g & SIP > > >> Sasa, >> >> You can actually just rename the .cop file to a .tar.gz file. Cisco >> doesn't have (to my knowledge) any non-callmanager SIP software. The SIP >> load is just a SIP load, not a SIP load unique to generic SIP or >> callmanager. >> >> Dave >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] On Behalf Of Stefan >> Gofferje >> Sent: Thursday, October 09, 2008 7:28 AM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [asterisk-users] Cisco 7906g & SIP >> >> Sasa schrieb: >>>> I need other files other than those obtained with >>>> cmterm-7911_7906-sip.8-0-4sr1.cop ?? >> >> cmterm is the callmanager software. You need to get the non-callmanager >> SIP-software. Contact your local Cisco representative to buy a license >> for that. >> >> Terve, >> Stefan >> >> -- >> Last words of a stormchaser: >> "Where is that rotation on the radar?!" >> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users