After getting some ERRORS like this: [Oct 8 21:42:49] ERROR[31903] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[2485] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[31903] rtp.c: No RTP ports remaining. Can't setup media stream for this call. [Oct 8 21:42:49] ERROR[2489] rtp.c: No RTP ports remaining. Can't setup media stream for this call.
I start getting: ERROR[14844] chan_sip.c: Unable to build sip pvt data for 'TRUNK/DESTINATION' (Out of memory or socket error) [Oct 9 22:26:45] ERROR[14832] chan_sip.c: Unable to build sip pvt data for 'TRUNK/DESTINATION' (Out of memory or socket error). I had installed Asterisk-1.4.21, but this version stop from receiving calls after these errors occured. Then I downgrade to version 1.4.19 (because I had have tested that version), but after getting these error it stop from creating the outbound call. The configuration of the * is an incomming call from the my SIP Provider and after internal manage it makes a second call to other destination--DID--. For AGI compatibility issues I could not use Version 1.4.22 (issues whith DeadAGI for billing purpuses). This is my rtp.conf [general] ; ; RTP start and RTP end configure start and end addresses ; ; Defaults are rtpstart=5000 and rtpend=31000 ; rtpstart=10000 rtpend=20000 This is my sip.conf for the TRUNK [TRUNK] type=peer nat=never host=destination.public.ip.address fromdomain=my.public.ip.address dtmfmode=rfc2833 canreinvite=no disallow=all allow=g729 Please help. -- Juan E. Rodríguez
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users