Hello, Thank you for the advice. I am sorry but I could not locate the problem in the forum. Do you remember anything more specific about it? And was it on asterisk-users? Do you remember year and month when it was seen?
Thanks a lot, Roberts On Tue, 2008-10-14 at 05:20 -0400, broadband Voice wrote: > You need to download a patch for zaptel, thats why your server is > crushing. Search through the forum, there is a known problem or > reverse to a version of Asterisk that is compatible with you zaptel. > > On Tue, Oct 14, 2008 at 2:19 AM, Roberts Klotins <[EMAIL PROTECTED]> > wrote: > Hello there, > > With extended logging options the events just before Asterisk > dying look > like this: > > [Oct 14 00:52:45] VERBOSE[2496] logger.c: == Starting post > polarity > CID detection on channel 1 > [Oct 14 00:52:45] DEBUG[2496] dsp.c: dsp busy pattern set to > 500,500 > [Oct 14 00:52:45] VERBOSE[3188] logger.c: -- Starting > simple switch > on 'Zap/1-1' > [Oct 14 00:52:47] NOTICE[3188] chan_zap.c: Got event 4 > (Alarm)... > [Oct 14 00:52:47] DEBUG[3188] chan_zap.c: Ignoring Polarity > switch to > IDLE on channel 1, state 9 > [Oct 14 00:52:47] DEBUG[3188] chan_zap.c: Polarity Reversal > event > occured - DEBUG 2: channel 1, state 9, pol= 0, aonp= 0, honp= > 0, pdelay= > 600, tv= -123711628 > [Oct 14 00:52:48] NOTICE[3188] chan_zap.c: Alarm cleared on > channel 1 > [Oct 14 00:52:48] DEBUG[3188] chan_zap.c: Ignore switch to > REVERSED > Polarity on channel 1, state 9 > [Oct 14 00:52:48] DEBUG[3188] chan_zap.c: Ignoring Polarity > switch to > IDLE on channel 1, state 9 > [Oct 14 00:52:48] DEBUG[3188] chan_zap.c: Polarity Reversal > event > occured - DEBUG 2: channel 1, state 9, pol= 0, aonp= 0, honp= > 0, pdelay= > 600, tv= -123710540 > > And that is the last event. Channel 1 is FXO port where my BT > line is > plugged in. Can anyone suggest if it seems this may be a card > fault, or > have I misconfigured something? > > I would really appreciate your help, I cannot afford to have > asterisk > die randomly. > > Roberts > > On Mon, 2008-10-06 at 08:26 +0100, Roberts Klotins wrote: > > Hi All, > > > > I am getting these events in asterisk message log: > > NOTICE[16647] chan_zap.c: Got event 4 (Alarm)... > > NOTICE[16647] chan_zap.c: Alarm cleared on channel 1 > > > > after that asterisk exits silently until I restart it. > Sometimes zapata > > drivers also get in a state where I need to physically > restart the > > machine. Does anyone have any suggestions how to > troubleshoot these > > alarm events? > > > > Roberts > > > > > > _______________________________________________ > > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > > > > AstriCon 2008 - September 22 - 25 Phoenix, Arizona > > Register Now: http://www.astricon.net > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > > > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users