I installed Trixbox and a TDM400P with 2 FXO and 2 FXS ports and am having an annoying issue with the FXO ports. As soon as I plug either one into the phone line it's as though the line is disconnected i.e. get disconnected tone when trying to dial out, line is busy when dialling in.
The CLI shows the following: trixbox1*CLI> zap show channel 4 Channel: 4 File Descriptor: 18 Span: 11* Extension: Dialing: no Context: from-pstn Caller ID: Calling TON: 0 Caller ID name: Destroy: 0 InAlarm: 1 Signalling Type: FXS Kewlstart Radio: 0* Owner: <None> Real: <None> Callwait: <None> Threeway: <None> Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no1* Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: ulaw Fax Handled: no Pulse phone: no Echo Cancellation: 128 taps unless TDM bridged, currently OFF Actual Confinfo: Num/0, Mode/0x0000 Actual Confmute: No Hookstate (FXS only): Onhook When plugged in: trixbox1*CLI> zap show channel 4 Channel: 4 File Descriptor: 18 Span: 11* Extension: Dialing: noI Context: from-pstn Caller ID: I Calling TON: 0 Caller ID name: Destroy: 0 InAlarm: 0 Signalling Type: FXS Kewlstart Radio: 0* Owner: <None> Real: <None> Callwait: <None> Threeway: <None> Confno: -1 Propagated Conference: -1 Real in conference: 0 DSP: no1* Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: ulaw Fax Handled: no Pulse phone: no Echo Cancellation: 128 taps unless TDM bridged, currently OFF Actual Confinfo: Num/0, Mode/0x0000 Actual Confmute: No Hookstate (FXS only): Offhook When cable plugged in: [Oct 20 09:02:56] DEBUG[2359] chan_zap.c: Monitor doohicky got event No more alarm on channel 4 [Oct 20 09:02:56] NOTICE[2359] chan_zap.c: Alarm cleared on channel 4 When cable unplugged: [Oct 20 09:04:55] DEBUG[2359] chan_zap.c: Monitor doohicky got event Alarm on channel 4 [Oct 20 09:04:55] WARNING[2359] chan_zap.c: Detected alarm on channel 4: No Alarm [Oct 20 09:04:55] DEBUG[2359] chan_zap.c: disabled echo cancellation on channel 4 I suspect this alarm status is normal behaviour? vi /etc/zaptel.conf # Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER) fxoks=1 fxoks=2 fxsks=3 fxsks=4 # Global data loadzone = nz defaultzone = nz vi /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] [channels] language=en context=from-zaptel signalling=fxs_ks rxwink=300 ; Atlas seems to use long (250ms) winks ; ; Whether or not to do distinctive ring detection on FXO lines ; ;usedistinctiveringdetection=yes sendcalleridafter=2 callerid=asreceived usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no ;echotraining=800 rxgain=0.0 txgain=0.0 group=0 callgroup=1 pickupgroup=1 immediate=no ;faxdetect=both faxdetect=incoming ;faxdetect=outgoing ;faxdetect=no ;Include genzaptelconf configs #include zapata-auto.conf vi /etc/asterisk/zapata-auto.conf ; Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit ; Zaptel Channels Configurations (zapata.conf) ; ; This is not intended to be a complete zapata.conf. Rather, it is intended ; to be #include-d by /etc/zapata.conf that will include the global settings ; ; Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1" (MASTER) ;;; line="1 WCTDM/0/0 FXOKS (In use)" signalling=fxo_ks callerid="Channel 1" <6001> mailbox=6001 group=5 context=from-internal channel => 1 callerid= mailbox= group= context=default ;;; line="2 WCTDM/0/1 FXOKS (In use)" signalling=fxo_ks callerid="Channel 2" <6002> mailbox=6002 group=5 context=from-internal channel => 2 callerid= mailbox= group= context=default ;;; line="3 WCTDM/0/2 FXSKS (In use)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 3 context=default ;;; line="4 WCTDM/0/3 FXSKS (In use)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 4 context=default dmesg seems OK zaptel: no version for "oslec_echo_can_traintap" found: kernel tainted. Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.9.2- Zaptel Echo Canceller: OSLEC Zaptap registered 'sample' char driver on major 33 Freshmaker version: 73 Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO Module 1: Installed -- AUTO FXS/DPO Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV I (4 modules) lsmod | grep zaptel zaptel 198328 20 xpp,wcusb,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp,tor2,wctdm oslec 13848 1 zaptel crc_ccitt 6337 1 zaptel -All 4 lights on the board are lit green. -The FXS ports work fine. -The issue occurs on both FXO ports (i.e. channel 3 and 4) Any suggestions appreciated. Cameron _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
