A.R. Nasir Qureshi wrote: > Dear All, > > I am trying to setup an ISDN line from local telco on a digium card. The > problem I am facing is that I am not getting any caller id from the > telco. They say that they have enabled caller id.
Tell them they are wrong. There is no calling party number IE in that SETUP message below. :-) Matthew Fredrickson Digium, Inc. > > Please help me out. > > My zapata.conf > -------------------------------------------------------------------------------------------------------------------- > [trunkgroups] > > [channels] > context=pstnincoming > pridialplan=local > prilocaldialplan=local > > usecallerid=yes > cidsignalling=v23 > cidstart=ring > hidecallerid=no > callwaiting=no > usecallingpres=yes > sendcalleridafter=1 > echocancel=no > echocancelwhenbridged=no > rxgain=0.0 > txgain=0.0 > callgroup=1 > pickupgroup=1 > > immediate=no > callerid=asreceived > busydetect=no > busycount=6 > callprogress=no > faxdetect=incoming > > > switchtype = national > signalling = pri_cpe > group = 1 > channel => 1-15,17-31 > channel => 32-46,48-62 > -------------------------------------------------------------------------------------------------------------------- > > The information I get from using "pri intense debug span 1" is: > -------------------------------------------------------------------------------------------------------------------- > < [ 02 01 16 9c 08 02 15 01 05 04 03 80 90 a3 18 03 a1 83 81 70 08 c1 34 > 33 39 32 38 34 32 a1 ] > > < Informational frame: > < SAPI: 00 C/R: 1 EA: 0 > < TEI: 000 EA: 1 > < N(S): 011 0: 0 > < N(R): 078 P: 0 > < 26 bytes of data > Handling message for SAPI/TEI=0/0 > -- ACKing all packets from 77 to (but not including) 78 > -- Since there was nothing left, stopping T200 counter > -- Stopping T203 counter since we got an ACK > -- Nothing left, starting T203 counter > < Protocol Discriminator: Q.931 (8) len=26 > < Call Ref: len= 2 (reference 5377/0x1501) (Originator) > < Message type: SETUP (5) > < [04 03 80 90 a3] > < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer > capability: Speech (0) > < Ext: 1 Trans mode/rate: 64kbps, > circuit-mode (16) > < User information layer 1: A-Law (35) > < [18 03 a1 83 81] > < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 > Preferred Dchan: 0 > < ChanSel: As indicated in following octets > < Ext: 1 Coding: 0 Number Specified Channel Type: 3 > < Ext: 1 Channel: 1 ] > < [70 08 c1 34 33 39 32 38 34 32] > < Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI: > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '4392842' ] > < [a1] > < Sending Complete (len= 1) > -- Making new call for cr 5377 > -- Processing Q.931 Call Setup > -- Processing IE 4 (cs0, Bearer Capability) > -- Processing IE 24 (cs0, Channel Identification) > -- Processing IE 112 (cs0, Called Party Number) > -- Processing IE 161 (cs0, Sending Complete) > q931.c:3509 q931_receive: call 5377 on channel 1 enters state 6 (Call > Present) > Sending Receiver Ready (12) > > -------------------------------------------------------------------------------------------------------------------- > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users