Daniel, while I am not sure whether or not you can just skip channels (my guess would be you just skip them in /etc/asterisk/zapata.conf), you don't want more than a total of 62 channels in your configuration.
Your 2nd span's configuration appears to be off by one channel. I would try: span=2,0,0,ccs,hdb3 bchan=32-46,48-62 dchan=47 Also skip the dchan=64 definition, since that channel would be in a 3rd span. Thilo Thilo On Sun, 2004-01-04 at 18:11, Daniel Bichara wrote: > Hi, > > I have two E100P boards connected to my PC. I wish to setup two > E1-ISDN-PRI lines, the first SPAN with 15 channels and the second one > with 30 channels. When I try to load zaptel modules, I get an error message: > > "Loading zaptel framework: > Loading zaptel hardware modules: wct1xxp wcusb > Running ztcfg: ZT_CHANCONFIG failed on channel 63: No such device" > > Follows my zaptel.conf: > > span=1,0,0,ccs,hdb3 > bchan=1-15 > dchan=16 > span=2,0,0,ccs,hdb3 > bchan=33-47,49-63 > dchan=48,64 > > Any clue? > > Daniel > > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users