Jared Smith wrote: > On Wed, 2008-11-19 at 11:07 -0800, Roderick A. Anderson wrote: >> The TDM400 works taking inbound calls and gives a dial tone when the >> phone is picked up but as soon as a key is pressed the line (Asterisk >> says) hangs up. Asterisk is configured based on a working system but >> that one only has one module inbound (FXO?) The outbound settings are >> based on docs from voip-info.org. > > It sounds to me like you've got the two channels pointed at a context > that doesn't exist, or there aren't extensions in that context that > match the number being dialed. Look in zapata.conf (or chan_dahdi.conf > if you're using DAHDI) and look for the "context=" line immediately > above the "channel=>" line for each channel. That tells Asterisk where > in the dialplan to look when calls come into Asterisk from those > channels. > > Next, look at extensions.conf and see if those contexts exist. For > example, if your FXS port (the port connected to an analog phone) is > channel 1, and you're trying to dial extension 500 from the analog > phone, make sure the context contains an extension 500. > > You can also check from the Asterisk CLI by typing "dialplan show > [EMAIL PROTECTED]", where 500 is the extension you're trying to dial and > context is the name of the context where calls are being sent.
Thanks for the pointers Jared. They will help. Rod -- _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users