Hi! > The problem I have is when I put a call on hold, or attempt to transfer > a call (same issue, I expect). Once the call is put on hold, I can't > resume it and, after a couple of seconds, I get a "Maximum retries > exceeded" error (verbose mode). > ... > I suspect that the Cisco 7960 configuration is at fault here, and am > wondering if anyone has any advice. > ... > I have tried the latest Asterisk version from CVS but that doesn't > seem to like my phone at all. For instance, the voicemail application > won't read the DTMF tones and so won't allow me to enter a password. > ... > Thanks for any help that can be offered with this. I can live with > version 0.5.0 and just not use hold/transfer, but I'd prefer to find > a solution.
I assume you are using SIP instead of Skinny for your Cisco? If yes, then make sure to add disallow=all allow=ulaw allow=alaw to each of your sip.conf users when using the CVS Asterisk instead of the truly old 0.5.0 version. Add any other codecs besides the g.711 (=ulaw/alaw) you desire with additional allow= statements. Read about Skinny (or sccp) on this list if you haven't switched to SIP - there is only minimal support for that protocal in Asterisk. And please do search the list archive as well as the Wiki for 7960 - you will find tons of postings (I don't own one of those, so I can't help here). Cheers, Philipp _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
