Here's also an example snip from the debug log: [07:42:20] -- Executing [...@mainmenu:15] Dial("Zap/1-1", "SIP/105|18|tKk") in new stack [07:42:20] -- SIP/105-08571180 is ringing [07:42:39] -- Nobody picked up in 18000 ms [07:42:39] -- Executing [...@mainmenu:16] Answer("Zap/1-1", "") in new stack [07:42:39] -- Executing [...@mainmenu:17] Wait("Zap/1-1", "1") in new stack [07:42:40] -- Executing [...@mainmenu:18] Playback("Zap/1-1", "silence/1") in new stack [07:42:40] -- <Zap/1-1> Playing 'silence/1' (language 'en') [07:42:41] -- Executing [...@mainmenu:19] BackGround("Zap/1-1", "please-leave-a-message") in new stack [07:42:41] -- <Zap/1-1> Playing 'please-leave-a-message' (language 'en') [07:42:47] -- Executing [...@mainmenu:20] VoiceMail("Zap/1-1", "105|s") in new stack [07:42:48] -- <Zap/1-1> Playing 'beep' (language 'en') [07:42:48] -- Recording the message [07:42:48] -- x=0, open writing: /var/spool/asterisk/voicemail/default/100/tmp/UNCGT6 format: wav49, 0x8570eb8 [07:42:48] -- x=1, open writing: /var/spool/asterisk/voicemail/default/100/tmp/UNCGT6 format: gsm, 0x8227430 [07:42:48] -- x=2, open writing: /var/spool/asterisk/voicemail/default/100/tmp/UNCGT6 format: wav, 0x8259b10 [07:46:42] -- Recording automatically stopped after a silence of 10 seconds [07:46:42] -- <Zap/1-1> Playing 'auth-thankyou' (language 'en') [07:46:43] == Auto fallthrough, channel 'Zap/1-1' status is 'NOANSWER' [07:46:43] -- Hungup 'Zap/1-1'
On Fri, Jan 16, 2009 at 12:07 PM, Steve Johnson <stevej...@gmail.com> wrote: > Hello all, > > I have one Asterisk 1.4.21 system connected to a North American POTS > line. Normally hangup detection works fine, and Asterisk hangs up > properly if you are talking to a caller and they hang up; but > occasionally a call comes in (typically from a US telemarketer) where > the caller hangs up just as voicemail recording is starting, and you > get a voicemail recording of dialtone (then congestion and off-hook > warning tones) for almost 4 minutes before asterisk gives up the line. > > zapata.conf [channels] options are: > > language=en > context=default > rxwink=300 > usecallerid=yes > hidecallerid=no > cidsignalling=bell > callwaiting=no > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=no > transfer=yes > canpark=yes > cancallforward=no > callreturn=no > musiconhold=default > echocancel=yes > echocancelwhenbridged=yes > immediate=no > faxdetect=no > relaxdtmf=yes > hanguponpolarityswitch=yes > progzone=us > signalling=fxs_ks > channel => 1 > > > Any suggestions for voicemail detecting/rejecting messages when there > is only dialtone on the other end? > > Thanks! > > S. > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users