Yeah thanks a lot, It worked that way...
> Oguzhan Kayhan schreef: >>>> Oguzhan Kayhan wrote: >>>> >>>>> I want to change it to E1 instead of T1. >>>>> here comes the problem. >>>>> >>>>> >>>> If it's anything like the older cards, there is a jumper on the card >>>> that sets it to T1/E1 >>>> >>>> Doug >>>> >>>> >>> Yes, >>> I just noticed the jumper on the card. >>> Thanks a lot. >>> >>> >>> >> Yes i changed the jumper to enable E1. >> dahdi_scan shows the following >> [1] >> active=yes >> alarms=UNCONFIGURED >> description=Wildcard TE121 Card 0 >> name=WCT1/0 >> manufacturer=Digium >> devicetype=Wildcard TE121 with VPMADT032 >> location=PCI Bus 04 Slot 09 >> basechan=1 >> totchans=31 >> irq=17 >> type=digital-E1 >> syncsrc=0 >> lbo=0 db (CSU)/0-133 feet (DSX-1) >> coding_opts=HDB3 >> framing_opts=CCS,CRC4 >> coding= >> framing= >> >> But when i try to run dahdi_genconf i got the following error. >> >> 31 channels in a T1 span at /usr/local/share/perl/5.10.0/Dahdi/Span.pm >> line 244. >> >> > >> dahdi_hardware >> 31 channels in a T1 span at /usr/local/share/perl/5.10.0/Dahdi/Span.pm >> line 244. >> >> > There is a bug in the perl module. I had the same problem. It trips over > the following part "*WCT1/0*" in "*WCT1/0* "Wildcard TE121 Card 0" > (MASTER) HDB3/CCS". It finds the text T1 in there and expects it to be a > T1 jumpered card in stead of an E1 jumpered card and it tries to create > a T1 system.conf file. I still need to make a bug report about this. > > Your card is probably working allright. Create the right system.conf > file in /etc/dahdi/ > Mine has (E1 for Dutch KPN ISDN15/20/30) and the following lines: > /# Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) HDB3/CCS/CRC4 > RECOVERING > span=1,1,0,ccs,hdb3 > # termtype: te > bchan=1-15,17-31 > dchan=16 > echocanceller=mg2,1-15,17-31 > / > Probably you have to enter ",CRC4" at the end of the span line. > (span=1,1,0,ccs,hdb3,crc4) > When you edited the file do a: > # dahdi_cfg -vvvv > DAHDI Tools Version - 2.1.0.2 > > DAHDI Version: 2.1.0.4 > Echo Canceller(s): MG2 > Configuration > ====================== > > SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) > > Channel map: > > Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) > Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) > <SNIP> > Channel 15: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 15) > Channel 16: D-channel (Default) (Slaves: 16) > Channel 17: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 17) > <SNIP> > Channel 31: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 31) > > 31 channels to configure. > > Setting echocan for channel 1 to mg2 > <SNIP> > > And followed by: > #cat /proc/dahdi/1 > Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) HDB3/CCS > IRQ misses: 1 > > 1 WCT1/0/1 Clear (In use) (EC: MG2) > 2 WCT1/0/2 Clear (In use) (EC: MG2) > 3 WCT1/0/3 Clear (In use) (EC: MG2) > 4 WCT1/0/4 Clear (In use) (EC: MG2) > 5 WCT1/0/5 Clear (In use) (EC: MG2) > 6 WCT1/0/6 Clear (In use) (EC: MG2) > 7 WCT1/0/7 Clear (In use) (EC: MG2) > 8 WCT1/0/8 Clear (In use) (EC: MG2) > 9 WCT1/0/9 Clear (In use) (EC: MG2) > 10 WCT1/0/10 Clear (In use) (EC: MG2) > 11 WCT1/0/11 Clear (In use) (EC: MG2) > 12 WCT1/0/12 Clear (In use) (EC: MG2) > 13 WCT1/0/13 Clear (In use) (EC: MG2) > 14 WCT1/0/14 Clear (In use) (EC: MG2) > 15 WCT1/0/15 Clear (In use) (EC: MG2) > 16 WCT1/0/16 HDLCFCS (In use) > 17 WCT1/0/17 Clear (EC: MG2) > 18 WCT1/0/18 Clear (EC: MG2) > 19 WCT1/0/19 Clear (EC: MG2) > 20 WCT1/0/20 Clear (EC: MG2) > 21 WCT1/0/21 Clear (EC: MG2) > 22 WCT1/0/22 Clear (EC: MG2) > 23 WCT1/0/23 Clear (EC: MG2) > 24 WCT1/0/24 Clear (EC: MG2) > 25 WT1/0/25 Clear (EC: MG2) > 26 WCT1/0/26 Clear (EC: MG2) > 27 WCT1/0/27 Clear (EC: MG2) > 28 WCT1/0/28 Clear (EC: MG2) > 29 WCT1/0/29 Clear (EC: MG2) > 30 WCT1/0/30 Clear (EC: MG2) > 31 WCT1/0/31 Clear (EC: MG2) > > I have a ISDN15 connected to it so only 15 lines are in use. If you see > something like YELLOW or RED or BLUE in the previous something is wrong > with your line. I had this first but this was because I had the CRC4 > option added to my system.conf file. Your syslog log file > /var/log/messages wil tell also if you have an alarm. > > Regards, Michel. >> >> What should i do about it? >> >> >> >>> >>>> -- >>>> >>>> Ben Franklin quote: >>>> >>>> "Those who would give up Essential Liberty to purchase a little >>>> Temporary >>>> Safety, deserve neither Liberty nor Safety." >>>> >>>> >>>> _______________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> asterisk-users mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-users >>>> >>>> >>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >>> >> >> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users