Hi All, We've got msidn configured:
Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- mISDN_close: fid(3) isize(131072) inbuf(0x8fd5060) irp(0x8fd5060) iend(0x8fd5060) and running on Asterisk 1.4.21.2: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link UP L1Link:UP Blocked:0 Debug:0 but I'm not sure how to check our settings are right with Etisalat, as above then goes to: pbx*CLI> misdn show stacks BEGIN STACK_LIST: * Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0 Debug:0 /etc/misdn-init.conf: card=1,hfcpci te_ptmp=1 poll=128 dsp_poll=128 dsp_options=0 dtmfthreshold=100 debug=0 /etc/asterisk/misdn.conf: [general] debug = 0 method=standard bridging=no stop_tone_after_first_digit=yes append_digits2exten=yes dynamic_crypt=no crypt_prefix=** crypt_keys=test,muh [default] context=misdn language=en musicclass=default senddtmf=yes far_alerting=no allowed_bearers=all nationalprefix=0 internationalprefix=00 rxgain=0 txgain=0 te_choose_channel=no pmp_l1_check=no reject_cause=16 need_more_infos=no nttimeout=no method=standard dialplan=0 localdialplan=0 cpndialplan=0 early_bconnect=yes incoming_early_audio=no nodialtone=no callgroup=1 pickupgroup=1 presentation=-1 screen=-1 echocancel=yes jitterbuffer=4000 jitterbuffer_upper_threshold=0 hdlc=no [isdn] ports=1 context=from-pstn msns=* Now we've setup PRi before, but not BRI and not in Dubai. If anyone has an idea or config that would be great and I'd make sure it goes on voip-info.org for others too. Thanks, Gavin. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
