Here is what my extensions.conf file has: exten => _NXXNXXXXXX,1,Dial(DAHDI/g1/${EXTEN}) exten => _NXXNXXXXXX,n,Hangup()
exten => _1NXXNXXXXXX,1,Dial(DAHDI/g1/${EXTEN}) exten => _1NXXNXXXXXX,n,Hangup() Using the phone, I can dial any numbers succesfully. And here is my call file: Channel: DAHDI/g1/1XXXXXXXXXX Callerid: XXXXXXXXXX MaxRetries: 1 RetryTime: 5 WaitTime: 60 Context: test Extension: s Priority: 1 with the call file I can dial my cellphone which begin with 754XXXXXXX but when I call my friend's cellphone from new york which is 201XXXXXXX i get progress code 127 as follows -- Attempting call on DAHDI/g1/1201XXXXXXX for s...@test:1 (Retry 1) -- Requested transfer capability: 0x00 - SPEECH -- PROGRESS with cause code 127 received I tried with the prefix 1 and without the prefix 1 it is always the same thing, but with the handset I dial my phone and my friend's phone succesfully with and without the 1 On Thu, Mar 19, 2009 at 9:21 AM, Danny Nicholas <da...@debsinc.com> wrote: > Please paste the call file content (with the number XXXX’ed of course) > and the Dial section from extensions.conf. > > > ------------------------------ > > *From:* asterisk-users-boun...@lists.digium.com [mailto: > asterisk-users-boun...@lists.digium.com] *On Behalf Of *Pascal Bruno > *Sent:* Wednesday, March 18, 2009 6:24 PM > *To:* Asterisk Users Mailing List - Non-Commercial Discussion > *Subject:* Re: [asterisk-users] T1 problem (call using a .call file) > > > > This has to be a bug, because I dont know what else to try here > > > > > > On Wed, Mar 18, 2009 at 11:16 AM, Pascal Bruno <tipas...@gmail.com> wrote: > > Nope, I always dial 1 + 10 digits for all my numbers. It works on all > numbers when I am using my phone (Analogue or IP) but when I do it using a > .call file it does not work on some numbers mostly. That is the weirdest > thing I have ever seen. I tried different codecs in the call file, I still > get the PROGRESS with cause code 127 > > > > > > > > > > On Wed, Mar 18, 2009 at 10:47 AM, David Backeberg <dbackeb...@gmail.com> > wrote: > > On Mon, Mar 16, 2009 at 6:42 PM, Pascal Bruno <tipas...@gmail.com> wrote: > > I have a weird problem with call using my T1 card. I can make calls fine > > using my analog and IP phones, but when I try to initiate a call using a > > .call file, I get the following error > > -- Attempting call on DAHDI/g1/1XXXXXXXXXX for s...@test:1 (Retry 1) > > -- Requested transfer capability: 0x00 - SPEECH > > -- PROGRESS with cause code 127 received > > it happens on certain numbers I dial, but if I dial that same number with > an > > ip or analog phone that use the T1 channel, the call is going through > > normally. > > Anybody knows why? > > Are you doing anything silly with prefixing or short-circuit dialing? > > in other words.. > > You dial 8 for an outside line, then 1+10 digits > and you're forgetting to do that for some numbers? > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users