We are not having a problem in the BLF area, and we do qualify our remote phones. I don't know if "qualify" does any thing beyond pinging the address, but perhaps it does carry a data payload too.
Cary Fitch -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Ken Williams Sent: Wednesday, March 25, 2009 7:06 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] gpx 2000 Busy Lamp Field I seem to recall qualify being part of the problem. I'm not qualifying any extensions. In addition, the BLF I'm doing is for parked lines not for SIP extensions, so not sure if that's part of the problem either. I do not recall seeing the notify messages you're asking about, but I believe that's because of the two things mentioned above. Ken -----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Vieri Sent: Wednesday, March 25, 2009 1:41 AM To: asterisk-users@lists.digium.com Subject: Re: [asterisk-users] gpx 2000 Busy Lamp Field Out of shear curiosity, do you mind running "asterisk -rx "show hints" | grep <your_exten>" 16 minutes after you unplugged your phone, as in my example test below? Also, in the * CLI or log, do you see a message such as: Extension Changed 4063[ext-local] new state XXX for Notify User 4062 right when your phone's registration expires? or when "asterisk -rx "sip show peers" | grep <your_exten>" gives an UNKNOWN status (if you use qualify for that SIP extension)? I'm just wondering where is my Asterisk version (1.4.24) failing compared to yours. Thanks, Vieri --- On Tue, 3/24/09, Ken Williams <k...@intermountainelectronics.com> wrote: > I recall having similar issues early > in Asterisk 1.4...but currently running 1.4.17 and BLF works > great with a phone expiration of 15 minutes. > > -----Original Message----- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] > On Behalf Of Vieri > Sent: Tuesday, March 24, 2009 1:02 PM > To: asterisk-users@lists.digium.com > Subject: Re: [asterisk-users] gpx 2000 Busy Lamp Field > > > I'm afraid this isn't a GXP2000 bug but a broken feature in > Asterisk 1.4, unless I'm overlooking something (it should > affect any phone with BLF; I only have GXP2000 sets). > > I don't have 1.6 yet so I can't see if BLF behaves the same > way. > > > --- On Tue, 3/24/09, Jon Pounder <j...@inline.net> > wrote: > > > I see much the same except I think if you investigate > > further, the light > > will be green whether the phone ever registered or > not. > > > > > --- On Tue, 3/24/09, Ken Williams <k...@intermountainelectronics.com> > > wrote: > > > > > > > > >> Our work around is to lower the > > >> registration expiration on the phones. > > >> > > > > > > Well, something's not working as "I expect it > to". My > > GXP2000 phones have re-registration timeout of 2 > minutes. > > > > > > In my example below, extension 4061 is unplugged > (so > > obviously it won't re-register, ever). Meanwhile, the > other > > GXP2000 phones keep seeing 4061 as "on-line" (green > led). > > > This happens with Asterisk 1.4.24. > > > > > > If I use Asterisk 1.2, the green LED turns red > within > > a few seconds. > > > > > > My guess is that Asterisk is not sending the > device > > state, or it's not correctly detecting that the phone > has > > not re-registered. > > > > > > I might not be interpreting the "hints" logic > > correctly, but I suppose that if a "sip show peer" > reveals > > that the extension is not registered (when it was > before) > > then Asterisk should send out a message to all > subscribed > > phones so that their BLF can be updated. > > > > > > As you can see below, 4061 is switched off, > isn't > > physically online anymore, but all BLF LEDs are > green. > > > > > > Why is this? > > > > > > # asterisk -rx "sip show peers" | grep 4061 > > > 4061/4061 > > (Unspecified) > > D N A 0 > > UNKNOWN > > > > > # asterisk -rx "sip show peer 4061" > > > > > > > > > * Name > > : 4061 > > > Secret > > : <Set> > > > MD5Secret : <Not > > set> > > > Context : > > from-internal > > > Subscr.Cont. : <Not set> > > > Language : > > en > > > AMA flags : Unknown > > > Transfer mode: open > > > CallingPres : Presentation > > Allowed, Not Screened > > > Callgroup : 2 > > > Pickupgroup : 2 > > > Mailbox : > > 4...@device > > > VM Extension : *97 > > > LastMsgsSent : 0/0 > > > Call limit : 50 > > > Dynamic : Yes > > > Callerid : > > "device" <4061> > > > MaxCallBR : 384 kbps > > > Expire > > : -1 > > > Insecure : > > no > > > Nat > > : Always > > > ACL > > : Yes > > > T38 pt UDPTL : No > > > CanReinvite : No > > > PromiscRedir : No > > > User=Phone : No > > > Video Support: No > > > Trust RPID : No > > > Send RPID : No > > > Subscriptions: Yes > > > Overlap dial : Yes > > > DTMFmode : > > rfc2833 > > > LastMsg : 0 > > > ToHost > > : > > > Addr->IP : > > (Unspecified) Port 0 > > > Defaddr->IP : 0.0.0.0 Port > > 5060 > > > Reg. exten : > > > Def. Username: 4061 > > > SIP Options : (none) > > > Codecs > > : 0x2 (gsm) > > > Codec Order : (gsm:20) > > > Auto-Framing: No > > > Status > > : UNKNOWN > > > Useragent : Grandstream > > GXP2000 1.1.6.46 > > > Reg. Contact : > > sip:4...@10.215.146.161:5060;transport=udp > > > > > > # asterisk -rx "show hints" | grep 4061 > > > > > 4...@ext-local > > : SIP/4061&Custom:DND4 > > State:Idle > > Watchers 1 > > > > > *764...@ext-dnd-hints > > : Custom:DEVDND4061 > > State:Idle > > Watchers 0 > > > > > *214...@ext-findmefollow : > > Custom:FOLLOWME4061 State:Idle > > Watchers 0 > > > > > > > > > PS: (I don't understand why 4...@ext-local has > > "State:Idle") > > > > > > Thanks, > > > > > > Vieri > > > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
