ok, 1) you're missing switchtype=euroisdn ...
2) so edit /etc/asteirsk/logger.conf make sure console => is not commented out; if it is then uncomment service asterisk stop asterisk -vvvng CLI>unload chan_zap.so CLI>load chan_zap.so it will tell you now what's the problem with registering the channels Martin On Thu, Apr 2, 2009 at 7:18 PM, Elliot Murdock <murdo...@gmail.com> wrote: > Hello! > > Here is all I got: > > system.info: > > span=1,1,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > bchan=17-31 > span=2,2,0,ccs,hdb3,crc4 > bchan=32-46 > dchan=47 > bchan=48-62 > > > dahdi_channels.conf: > ;This context forwarding incoming calls to SIP server on group (1), > channels 1-31 > context=default > ;singnalling type > signalling=pri_cpe > accountcode=11 > group = 1 > channel => 1-15 > channel => 17-31 > > ;other contexts add here > context=default > signalling=pri_cpe > resetinterval=never > group = 2 > channel => 32-46 > channel => 48-62 > > dahdi_scan: > > [1] > active=yes > alarms=RED > description=T2XXP (PCI) Card 0 Span 1 > name=TE2/0/1 > manufacturer=Digium > devicetype=Wildcard TE220 (4th Gen) > location=Board ID Switch 0 > basechan=1 > totchans=31 > irq=16 > type=digital-E1 > syncsrc=0 > lbo=0 db (CSU)/0-133 feet (DSX-1) > coding_opts=HDB3 > framing_opts=CCS,CRC4 > coding=HDB3 > framing=CCS > [2] > active=yes > alarms=RED > description=T2XXP (PCI) Card 0 Span 2 > name=TE2/0/2 > manufacturer=Digium > devicetype=Wildcard TE220 (4th Gen) > location=Board ID Switch 0 > basechan=32 > totchans=31 > irq=16 > type=digital-E1 > syncsrc=0 > lbo=0 db (CSU)/0-133 feet (DSX-1) > coding_opts=HDB3 > framing_opts=CCS,CRC4 > coding=HDB3 > framing=CCS > > dahdi_cfg -vv: > DAHDI Tools Version - 2.1.0.2 > > DAHDI Version: 2.1.0.4 > Echo Canceller(s): MG2 > Configuration > ====================== > > SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) > SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) > > Channel map: > > Channel 01: Clear channel (Default) (Slaves: 01) > Channel 02: Clear channel (Default) (Slaves: 02) > Channel 03: Clear channel (Default) (Slaves: 03) > Channel 04: Clear channel (Default) (Slaves: 04) > Channel 05: Clear channel (Default) (Slaves: 05) > Channel 06: Clear channel (Default) (Slaves: 06) > Channel 07: Clear channel (Default) (Slaves: 07) > Channel 08: Clear channel (Default) (Slaves: 08) > Channel 09: Clear channel (Default) (Slaves: 09) > Channel 10: Clear channel (Default) (Slaves: 10) > Channel 11: Clear channel (Default) (Slaves: 11) > Channel 12: Clear channel (Default) (Slaves: 12) > Channel 13: Clear channel (Default) (Slaves: 13) > Channel 14: Clear channel (Default) (Slaves: 14) > Channel 15: Clear channel (Default) (Slaves: 15) > Channel 16: D-channel (Default) (Slaves: 16) > Channel 17: Clear channel (Default) (Slaves: 17) > Channel 18: Clear channel (Default) (Slaves: 18) > Channel 19: Clear channel (Default) (Slaves: 19) > Channel 20: Clear channel (Default) (Slaves: 20) > Channel 21: Clear channel (Default) (Slaves: 21) > Channel 22: Clear channel (Default) (Slaves: 22) > Channel 23: Clear channel (Default) (Slaves: 23) > Channel 24: Clear channel (Default) (Slaves: 24) > Channel 25: Clear channel (Default) (Slaves: 25) > Channel 26: Clear channel (Default) (Slaves: 26) > Channel 27: Clear channel (Default) (Slaves: 27) > Channel 28: Clear channel (Default) (Slaves: 28) > Channel 29: Clear channel (Default) (Slaves: 29) > Channel 30: Clear channel (Default) (Slaves: 30) > Channel 31: Clear channel (Default) (Slaves: 31) > Channel 32: Clear channel (Default) (Slaves: 32) > Channel 33: Clear channel (Default) (Slaves: 33) > Channel 34: Clear channel (Default) (Slaves: 34) > Channel 35: Clear channel (Default) (Slaves: 35) > Channel 36: Clear channel (Default) (Slaves: 36) > Channel 37: Clear channel (Default) (Slaves: 37) > Channel 38: Clear channel (Default) (Slaves: 38) > Channel 39: Clear channel (Default) (Slaves: 39) > Channel 40: Clear channel (Default) (Slaves: 40) > Channel 41: Clear channel (Default) (Slaves: 41) > Channel 42: Clear channel (Default) (Slaves: 42) > Channel 43: Clear channel (Default) (Slaves: 43) > Channel 44: Clear channel (Default) (Slaves: 44) > Channel 45: Clear channel (Default) (Slaves: 45) > Channel 46: Clear channel (Default) (Slaves: 46) > Channel 47: D-channel (Default) (Slaves: 47) > Channel 48: Clear channel (Default) (Slaves: 48) > Channel 49: Clear channel (Default) (Slaves: 49) > Channel 50: Clear channel (Default) (Slaves: 50) > Channel 51: Clear channel (Default) (Slaves: 51) > Channel 52: Clear channel (Default) (Slaves: 52) > Channel 53: Clear channel (Default) (Slaves: 53) > Channel 54: Clear channel (Default) (Slaves: 54) > Channel 55: Clear channel (Default) (Slaves: 55) > Channel 56: Clear channel (Default) (Slaves: 56) > Channel 57: Clear channel (Default) (Slaves: 57) > Channel 58: Clear channel (Default) (Slaves: 58) > Channel 59: Clear channel (Default) (Slaves: 59) > Channel 60: Clear channel (Default) (Slaves: 60) > Channel 61: Clear channel (Default) (Slaves: 61) > Channel 62: Clear channel (Default) (Slaves: 62) > > 62 channels to configure. > > But, "pri show spans", nothing shows up. > > Thanks! > Elliot > On Fri, Apr 3, 2009 at 3:08 AM, Martin <asteriskl...@callthem.info> wrote: >> maybe you have to call the dahdi_scan with some argument to >> autogenerate config files ... >> >> for any dahdi T1/E1 card you have to work properly you have to have >> /etc/dahdi/system.conf >> configured with span= and bchan= and dchan= keyword >> and /etc/asterisk/dahdi*.conf with channel => keyword. >> >> check it out ... this is the first step... >> >> dahdi_cfg -vv should show all your 64 channels >> >> Martin >> >> On Thu, Apr 2, 2009 at 6:36 PM, Elliot Murdock <murdo...@gmail.com> wrote: >>> Hello! >>> >>> I am trying to configure my digium TE220 dual-span pci express card >>> with Dahdi. I seemed to have managed to set up the card with the >>> Dahdi kernel, as demonstrated by executing dahdi_scan: >>> >>> [1] >>> active=yes >>> alarms=RED >>> description=T2XXP (PCI) Card 0 Span 1 >>> name=TE2/0/1 >>> manufacturer=Digium >>> devicetype=Wildcard TE220 (4th Gen) >>> location=Board ID Switch 0 >>> basechan=1 >>> totchans=31 >>> irq=16 >>> type=digital-E1 >>> syncsrc=0 >>> lbo=0 db (CSU)/0-133 feet (DSX-1) >>> coding_opts=HDB3 >>> framing_opts=CCS,CRC4 >>> coding=HDB3 >>> framing=CCS >>> [2] >>> active=yes >>> alarms=RED >>> description=T2XXP (PCI) Card 0 Span 2 >>> name=TE2/0/2 >>> manufacturer=Digium >>> devicetype=Wildcard TE220 (4th Gen) >>> location=Board ID Switch 0 >>> basechan=32 >>> totchans=31 >>> irq=16 >>> type=digital-E1 >>> syncsrc=0 >>> lbo=0 db (CSU)/0-133 feet (DSX-1) >>> coding_opts=HDB3 >>> framing_opts=CCS,CRC4 >>> coding=HDB3 >>> framing=CCS >>> >>> However, when calling a "pri show spans" in asterisk, nothing comes >>> up. Although the physical cables are not yet connected, shouldn't it >>> state something like: >>> >>> PRI span 1/0: Provisioned, In Alarm, Down, Active >>> PRI span 2/0: Provisioned, In Alarm, Down, Active >>> >>> Any help will be appreciated! >>> Elliot >>> >>> _______________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-users mailing list >>> To UNSUBSCRIBE or update options visit: >>> http://lists.digium.com/mailman/listinfo/asterisk-users >>> >> >> _______________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-users mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users