Well maybe turn the dahdichanname=no to yes... And check if you can open "cat /dev/dahdi/pseudo" ... or better yet maybe you're running asterisk with user asterisk and it doesn't have access to /dev/dahdi/pseudo ... ? Meetme tries to open that for timing source.
Martin On Fri, Apr 3, 2009 at 10:24 AM, Dave Poirier <dpoir...@mesd.k12.or.us> wrote: > Thanks for the reply Martin. I'm pretty sure that we are running dahdi (see > below). Could the problem be that I didn't remove the Zaptel libraries prior > to compiling Asterisk? If that's the case I should be able to rerun the > ./configure without the zaptel libs and see if that fixes it. I'm just not > sure what it checks for though. I did set the dahdichanname=no in the > asterisk.conf if that makes any difference. It seemed to in calling the > channel in the dialplan but didn't seem to effect the meetme app. > > Thanks, > Dave > > Relevent bits from lsmod > > Module Size Used by > dahdi_dummy 38984 0 > dahdi_echocan_mg2 39048 0 > xpp_usb 52304 0 > xpp 226468 1 xpp_usb > wctc4xxp 83392 0 > dahdi_transcode 42376 1 wctc4xxp > wcb4xxp 110756 0 > wctdm 73804 0 > wcfxo 47136 0 > wctdm24xxp 159332 0 > wcte11xp 59936 0 > wct1xxp 48544 0 > wcte12xp 102404 0 > wct4xxp 349696 24 > dahdi 232144 66 > dahdi_dummy,dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp > > > From the console... > > asterisk*CLI> dahdi show status > Description Alarms IRQ bpviol > CRC4 > T2XXP (PCI) Card 0 Span 1 OK 0 0 > 0 > T2XXP (PCI) Card 0 Span 2 RED 0 0 0 > > > > > On Thu, Apr 2, 2009 at 9:40 PM, Martin <asteriskl...@callthem.info> wrote: >> >> That's very strange ... the code when is compiling checks whether >> zaptel is present and then >> the #define HAVE_ZAPTEL is set. >> >> Since your error says No "ZAP" channel ... >> >> and the code says >> >> ast_log(LOG_WARNING, "No %s channel available for conference, user >> introduction disabled\n", dahdi_chan_name); >> >> and >> >> in main/asterisk.c >> >> >> #ifdef HAVE_ZAPTEL >> static char _dahdi_chan_name[AST_CHANNEL_NAME] = "Zap"; >> #else >> static char _dahdi_chan_name[AST_CHANNEL_NAME] = "DAHDI"; >> #endif >> >> I deduct from that ... that you're still running zaptel and not dahdi. >> Because your log should say "No DAHDI channel available ..." UNLESS >> for some reason you only compiled >> chan_dahdi.so and copied it manually leaving the old app_meetme.so >> with HAVE_ZAPTEL flag... >> >> paste your lsmod output >> >> Martin >> > > > -- > David Poirier > > _______________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users