Ed W wrote: > Hi, got a Sangoma A200 with a bunch of extension cards and having real > problems getting it to deal with a normal single BT line > > Symptoms are that incoming calls are fine. Outgoing calls ring the far > end, BUT asterisk never sees that the call is answered (ie no message in > the logs files saying so), as a result the remove end can hear the PBX > side talking, but there is no audio back from the remote side to us. > When we hangup the log files show messages thave suggest it thinks the > line is still ringing > > Comparing with another line which works fine (this is a BT multi-line > system with what they call "PBX signalling" on it) I see that as soon as > the remote end answers then asterisk gets a log message stating the same > and audio is fine on this line > > > Have now spent nearly 4 months trying to get the signalling sorted on > this line. Most recently we requested "dual signalling" on the line - > the end result is now that outbound calls work and asterisk reports that > the phone answers, however, when you hangup the call then asterisk > obviously gets a bunch of extra line reversals and things there is an > immediate incoming call on the back of that outgoing call... > > Please - any suggestions on how to configure a Sangoma card for use with > a normal BT single line? > > Thanks > > Ed W
Hi Ed This is from a system with a Sangoma A200 on a Virgin/Telewest analogue line, haven't had a problem in 2 years /etc/wanpipe/wanpipe1.conf [devices] wanpipe1 = WAN_AFT_ANALOG, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 11 PCIBUS = 0 FE_MEDIA = FXO/FXS TDMV_LAW = MULAW TDMV_OPERMODE = FCC RM_NETWORK_SYNC = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO /etc/zaptel.conf loadzone=us defaultzone=us #Sangoma A200 [slot:11 bus:0 span:1] fxsks=3 fxsks=4 /etc/asterisk/zapata.conf [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=4.0 txgain=2.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A200 [slot:11 bus:0 span:1] context=from-zaptel group=0 signalling = fxs_ks channel => 3 #context=from-zaptel #group=0 #signalling = fxs_ks #channel => 4 As you can see only channel 3 is in use and yes I know zaptel.conf says loadzone=us defaultzone=us but it appeasr to make no difference with this card. Hope this helps Bails -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
