This may be a "left-field" .02, but it seems that you would need the JPEG codec up on the channel to send an image.
-----Original Message----- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Tilghman Lesher Sent: Wednesday, April 22, 2009 9:13 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] SendImage on SIP channel On Wednesday 22 April 2009 03:47:05 Sai P. Varanasi wrote: > Hi, > I am using Asterisk 1.6.0.7 and I have a SIP channel configured. I > connected a video phone. The sip.conf also has videosupport=yes in the > global section. > When I use the SendImage application in dialplan, the SENDIMAGERESULT value > is set to "NOSUPPORT". The phone shows video is enabled and is ready to > receive the images. The call is also established with H.263 codec as the > video codec. > > Does asterisk support SendImage on SIP channel? I couldn't find the > documentation related to this anywhere. If this is not supported, Is there > any other application which can do this? SendImage != video. There are features in IAX2 that are not present in any other protocol. One of these is the ability to send a snapshot image across the protocol. Video is something completely different. For video to work on SIP, you must negotiate it on call setup. -- Tilghman _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users