----- "--[ UxBoD ]--" <ux...@splatnix.net> wrote: ----- "Gordon Henderson" <gordon+aster...@drogon.net> wrote: > On Fri, 1 May 2009, Tzafrir Cohen wrote: > > > Is this a place where you get a polarity reversal event on call startup? > > In the UK we do. (Well on BT lines - I've a funny feeling some > Telewest/NTL lines use Bell signaling). > > On an incoming call we get: > > Polarity reversal. > FSK Caller ID burst > Ringing > > I've not upgraded any analogue systems to dahdi yet, but from what I've > read so-far, there's not much difference between the config files (other > than their names and locations), but a typical /etc/zaptel.conf file looks > like: > > fxoks=1 > fxsks=4 > loadzone=uk > defaultzone=uk > > This has one FXO and one FXS port. > > The corresponding zapata.conf is: > > [trunkgroups] > [channels] > usecallerid=yes > cidsignalling=v23 > cidstart=polarity > hidecallerid=no > callwaiting=no > threewaycalling=yes > transfer=yes > echocancel=yes > ;echotraining=yes ; off for oslec > ;echocancelwhenbridged=yes > immediate=no > faxdetect=no > > ; Channel 1: Local analogue line > context=internal > group=0 > signalling=fxo_ks > sendcalleridafter=2 > rxgain=0 > txgain=0 > mailbox=202 > callerid=The Red Phone <202> > channel => 1 > > ; Channel 4: PSTN line > context=incoming-zap-ddi > group=1 > usecallerid=yes > faxdetect=none > signalling=fxs_ks > rxgain=8 > txgain=8 > callerid=asreceived > channel => 4 > > Hope this is may be some use. > > Gordon > > _______________________________________________ > Could of bugs I have found relating to this issue but it appears to have been resolved :(
http://bugs.digium.com/view.php?id=12531&nbn=13 http://bugs.digium.com/view.php?id=14163&nbn=3 Best Regards, -- SplatNIX IT Services :: Innovation through collaboration _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
