Justin Phelps wrote: > I'm replacing a SoundPoint IP 600 with a SoundPoint IP 650. > > I attempted to simply reuse the existing config files for the old phone > on the new phone, but the new phone would lock up on the 4th digit when > attempted to dial out certain numbers. So, I downloaded the newest > firmware and config templates from Polycom, and attempted to migrate the > settings. Seems I'm missing something from the old configs though, and I > need some help figuring out why these expressions lock up the new phone. > > Old Configs > <digitmap > dialplan.digitmap="[2-9]11|[*]xx|891xxx|[1-7]xxx|8[0-46-8]xx|8500|851xxx|9,1[2-9]xxxxxxxxx|9,xxxxxxxT" > ^^^^^^^ > dialplan.digitmap.timeOut="3"/> > > Template from Polycom > <digitmap > dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT" > > dialplan.digitmap.timeOut="3|3|3|3|3|3"/> > > Anyone have any insight or suggestions on this issue, and on upgrading > Polycom configs in general? Do those certain numbers start with a 1 through 7? You may have to put a T in the above marked section and add to the series of dialplan.digitmap.timeOut. Just to keep myself from getting confused i usually put in the full string of time outs, needed or not. -- JohnM
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users