Swapping to a dumb hub (without uplink-autosensing) seems to fix it.
Would a firmware upgrade (from 3,56m 6154) help ? Tim. On 19 May 2009, at 13:28, Christian Stredicke wrote:
With cheap PoE devices Ethernet can easily get "on the edge" - or over the edge. If you have another switch/different model, a quick try will help isolating the problem.CS -----Ursprüngliche Nachricht----- Von: Tim Panton [mailto:t...@westhawk.co.uk] Gesendet: Dienstag, 19. Mai 2009 13:46An: Asterisk Users Mailing List - Non-Commercial Discussion; Christian StredickeBetreff: Re: [asterisk-users] Rusting Snoms? On further investigation - it may well be that the switch doesn't like the phones (or vice-versa) I tried daisy-chaining one phone off the second port of the other and got distinctly better audio. It's a new netgear fvs 318 with autosensing 100/10 ports. Any clues ? Thanks. Tim On 9 May 2009, at 11:04, Christian Stredicke wrote:Because the phone is a digital system, I would suspect that it is a problem with the switch. Run a quick PCAP trace to see where the jitter comes from. Depending on the firmware version, you can do that from the web interface. CS -----Ursprüngliche Nachricht----- Von: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com ] Im Auftrag von Tim Panton Gesendet: Samstag, 9. Mai 2009 11:46 An: Asterisk Users Mailing List - Non-Commercial Discussion Betreff: [asterisk-users] Rusting Snoms? This is a bit off topic, because I 'think' it isn't an Asterisk problem. However I'm not sure and anyhow I'm hoping someone may recognize the symptom. We moved offices a month ago. Our trusty SNOM190s (all between 3 and 5 years old) were packed up for the move, then unpacked a couple of weeks later. On unpacking them and connecting them to the new network, several of them didn't work well. The symptom is that outgoing RTP audio is garbled - like the packets are pulsed. Inbound is fine. This isn't true for all of the phones, just some of them. (The all run the same SNOM firmware) To be fair, they are on a new network, so it could be the cables or new 1Gb switches, except that the problem moves with the phone if you relocate it from one desk to another. I've tried a fresh asterisk install, but that didn't help either. So I am forced to conclude that something went 'bad' in those (old) phones while they were switched off. Has anyone got any clues for me? Thanks! Tim. Tim Panton - Web/VoIP consultant and implementor www.westhawk.co.uk _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-usersTim Panton - Web/VoIP consultant and implementor www.westhawk.co.uk
Tim Panton - Web/VoIP consultant and implementor www.westhawk.co.uk
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
