On Wed, May 20, 2009 at 07:03:15AM -0300, Daniel Bareiro wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi all! > > Days ago I bought a OpenVox A400P card with a port FXS and another FXO > that I am testing with my Asterisk installation in my house. I'm using > Asterisk 1.4.24.1 with DAHDI Linux 2.1.0.4 and DAHDI Tools 2.1.0.2 on > Debian GNU/Linux Lenny. > > I was reading "The future of telephony" and this [1] document looking > for information about how to configure both types of channels. > > Hardware is recognized without problems by operating system and DAHDI: > > # lspci > [...] > 00:0a.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN > interface > [...] > > > # cat /proc/dahdi/* > Span 1: DAHDI_DUMMY/1 "DAHDI_DUMMY/1 (source: HRtimer) 1" (MASTER) > > Span 2: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" > > 1 WCTDM/4/0 FXSKS RED > 2 WCTDM/4/1 FXOKS > 3 WCTDM/4/2 > 4 WCTDM/4/3 > > > # dahdi_hardware > pci:0000:00:0a.0 wctdm+ e159:0001 Wildcard TDM400P REV E/F > > > # dahdi_cfg -vvvvvvv > DAHDI Tools Version - 2.1.0.2 > > DAHDI Version: 2.1.0.4 > Echo Canceller(s): > Configuration > ====================== > > > Channel map: > > Channel 01: FXS Kewlstart (Default) (Slaves: 01) > Channel 02: FXO Kewlstart (Default) (Slaves: 02) > > 2 channels to configure. > > > In the configuration files I made the following modifications: > > /etc/dahdi/system.conf: > > # DGB - 20090518 > fxoks=2 > fxsks=1 > > ############ DGB > #[channels] > #language=en > #context=incoming > #signalling=fxs_ks > #usecallerid=yes > #hidecallerid=no > #callwaiting=yes > #callwaitingcallerid=yes > #threewaycalling=yes > #transfer=yes > #cancallforward=yes > #callreturn=yes > #echocancel=yes > #echocancelwhenbridged=yes > #rxgain=0.0 > #txgain=0.0 > #group=1 > #pickupgroup=1 > #immediate=yes > #musiconhold=default channel => 1 > ############ DGB > > > /etc/asterisk/chan_dahdi.conf: > > ; DGB - 20090518 > group=0
Hint: you don't need to set 'signalling' for analog channels. Or just set it explicitly to "auto". This is for Asterisk >= 1.6.0 . Simply reduces the complication a bit... > signaling=fxo_ks > channel => 2 > signaling=fxs_ks > channel => 1 > > > I load the modules wctdm and dahdi. But when I execute in Asterisk CLI > "dahdi show channels", I get the following error message: > > > No such command 'dahdi show channels' (type 'help dahdi show' for other > possible commands) > Try running: asterisk -r and in that prompt: module unload chan_dadhi.so module load chan_dadhi.so and tell us the output you got. -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users