On Sun, May 24, 2009 at 03:00:21PM +0100, Dunc wrote: > Tzafrir Cohen wrote: > > On Sun, May 24, 2009 at 12:36:26PM +0100, Dunc wrote:
> >> ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) > >> ;;; line="1 WCTDM/4/0" > >> signalling=fxs_ks > > > > signalling=fxo_ks > > > >> callerid=asreceived > >> group=0 > >> context=from-pstn > >> channel => 1 > >> callerid= > >> group= > >> context=default > >> > >> ;;; line="2 WCTDM/4/1" > >> signalling=fxo_ls > > > > signalling=fxs_ls > > > >> callerid="Channel 2" <4002> > >> mailbox=4002 > >> group=5 > >> context=from-internal > >> channel => 2 > >> callerid= > >> mailbox= > >> group= > >> context=default > > > > After those modifications, re-run dahdi-cfg and in Asterisk: > > > > asterisk -rx 'dahdi restart' > > > > Are you absolutely sure this is the right way round. I thought that an > FXO module connected to the wall, and used FXS signalling. And vice > versa. My channel 1 is the one connected to PSTN so surely it should > have FXS signalling? You're correct. I managed to confuse myself. Ignore this advice. But again: do you see the channels as '(In Use)' on lsdahdi / 'cat /proc/dahdi/*' ? -- Tzafrir Cohen icq#16849755 jabber:tzafrir.co...@xorcom.com +972-50-7952406 mailto:tzafrir.co...@xorcom.com http://www.xorcom.com iax:gu...@local.xorcom.com/tzafrir _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users