Ironhide*CLI> dialplan show phones [ Context 'phones' created by 'pbx_config' ] Include => 'internal' [pbx_config]
-= 0 extensions (0 priorities) in 1 context. =- Ironhide*CLI> dialplan show internal [ Context 'internal' created by 'pbx_config' ] '1000' => 1. Verbose(1|Extension 1000) [pbx_config] 2. Dial(SIP/1000|30) [pbx_config] 3. Hangup() [pbx_config] '1001' => 1. Verbose(1|Unrouted call handler) [pbx_config] 2. Answer() [pbx_config] 3. Wait(1) [pbx_config] 4. Playback(our-business-hours-are) [pbx_config] 5. Hangup() [pbx_config] '500' => 1. Verbose(1|Echo test application) [pbx_config] 2. Playback(our-business-hours-are) [pbx_config] 3. Hangup() [pbx_config] '_XXXXXXX' => 1. Verbose(1|Dial Digicel) [pbx_config] 2. Dial(${LOCAL_OUT_TRUNK}/${EXTEN}) [pbx_config] 3. Congestion() [pbx_config] 4. Hangup() [pbx_config] -= 4 extensions (15 priorities) in 1 context. =- Message: 11 Date: Sun, 14 Jun 2009 06:32:16 +0300 From: Tzafrir Cohen <tzafrir.co...@xorcom.com> Subject: Re: [asterisk-users] FXS - TDM400 - No dial tone To: asterisk-users@lists.digium.com Message-ID: <20090614033216.gf3...@xorcom.com> Content-Type: text/plain; charset=iso-8859-1 On Sat, Jun 13, 2009 at 10:13:11PM -0400, Richard McNeilly wrote: > More Troubleshooting > > Ironhide*CLI> zap show channels > ?? Chan Extension? Context???????? Language?? MOH Interpret > ?pseudo??????????? phones???????????????????? default > ????? 2??????????? phones???????????????????? default > ????? 3??????????? incoming?????????????????? default > ????? 4??????????? incoming?????????????????? default dialplan show phones On Sat, Jun 13, 2009 at 10:13 PM, Richard McNeilly<ramcnei...@gmail.com> wrote: > I have a TMD400 card installed in a PC with one fxs (installed in slot > 2) and two fxos (installed in slots 3 & 4). fxos work fine but I am > unable to get a dial tone for any devices connected to the fxs. I > have correctly connected the power supply to the card and I have even > tried moving the card from slot 1 to 2 on the board. > > Below is from the console when I try to route a call from FXO on slot > 4 to the FXS on slot 2. Notice the FXS is "ringing" > > -- Executing [...@incoming:1] Verbose("Zap/4-1", "1|Unrouted call > handler") in new stack > Unrouted call handler > -- Executing [...@incoming:2] Answer("Zap/4-1", "") in new stack > -- Executing [...@incoming:3] Wait("Zap/4-1", "1") in new stack > -- Executing [...@incoming:4] Dial("Zap/4-1", "Zap/2|30") in new stack > -- Called 2 > -- Zap/2-1 is ringing > -- Zap/2-1 is ringing > -- Zap/2-1 is ringing > -- Zap/2-1 is ringing > > zaptel.conf > > fxoks=2 > fxsks=3-4 > loadzone=us > defaultzone=us > > > zapata.conf > > [trunkgroups] > ;define any trunk groups > > [channels] > ; default > usecallerid=yes > hidecallerid=no > callwaiting=no > threewaycalling=yes > transfer=yes > echocancel=yes > echotraining=yes > immediate=no > > ; define incoming channels > signalling=fxs_ks ; Use FXS signaling for an FXO channel > context=incoming > callerid=asreceived > group=1 > channel => 3,4 ; PSTN attached to port 3 > > ; define outgoing channels > signalling=fxo_ks ; Use FXS signaling for an FXO channel > context=phones > group=2 > channel => 2 > > > > More Troubleshooting > > Ironhide*CLI> zap show channels > Chan Extension Context Language MOH Interpret > pseudo phones default > 2 phones default > 3 incoming default > 4 incoming default > > > ztcfg -vvv > > Zaptel Version: 1.4.11 > Echo Canceller: OSLEC > Configuration > ====================== > > > Channel map: > > Channel 02: FXO Kewlstart (Default) (Slaves: 02) > Channel 03: FXS Kewlstart (Default) (Slaves: 03) > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > 3 channels to configure. > > > Software-wise things seem ok and I am certain that I have the power > connected to the PCI card correctly. > > Any suggestions as to what I may be doing wrong here? > > Richard > _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users