Steve Casto escribió: >/ I am trying to retrieve the cause code of a outgoing call over a PRI />/ where the number called is out of service. When an out service number is />/ called I get a recording that the number dialed is not a working />/ number. I see cause code 1 in in the CLI as soon as the call is dialed />/ the Telco recording goes on for 30 sec. then hangs up. Any idea on how />/ retrieve info that the called number is is out of service. My />/ understanding is cause code 1 is an unallocated number. />/ thanks />/ Steve Casto />/ Asterisk 1.4.21.1 />/ />/ -- Executing [17609199147 at admin3 <http://lists.digium.com/mailman/listinfo/asterisk-users>:1] Dial("SIP/Bob-00aaf150", />/ "Zap/G1/17609199147||g") in new stack />/ -- Requested transfer capability: 0x00 - SPEECH />/ -- Called G1/17609199147 />/ -- Zap/23-1 is proceeding passing it to SIP/Bob-00aaf150 />/ -- PROGRESS with cause code 1 received />/ -- Zap/23-1 is making progress passing it to SIP/Bob-00aaf150 />/ -- Channel 0/23, span 1 got hangup, cause 102 />/ -- Hungup 'Zap/23-1' />/ == Everyone is busy/congested at this time (1:0/0/1) />/ -- Executing [17609199147 at admin3 <http://lists.digium.com/mailman/listinfo/asterisk-users>:2] NoOp("SIP/Bob-00aaf150", "102") />/ in new stack />/ == Auto fallthrough, channel 'SIP/Bob-00aaf150' status is 'CHANUNAVAIL' />/ />/ from extensions.conf />/ exten => _1NXXXXXXXXX,1,Dial(Zap/G1/${EXTEN},,g) />/ exten => _1NXXXXXXXXX,n,NoOp(${HANGUPCAUSE}) />/ />/ from zapata.conf />/ />>/ context=pri />>/ group=1 />>/ switchtype=national />>/ signalling = pri_cpe />>/ priindication = outofband />>/ channel =>1-23 />>/ />/ />/ /I never saw a PRI behave that way with a "progress with cause X", but I think that's to be able to reproduce the message. On all the PRI's I had the change to manage, if a number was unallocated the telco side would *request a hangup *with cause code X. That would leave you with a inmediate response that can be easily retrieved on ${HANGUPCAUSE} as you have in your dialplan. You can ask your telco to change the behavior to hangup with the corresponding cause code as you don't need to hear the message (if you still need your users to hear something, you can playback an appropiate internal message or tones depending on the hangup cause received).
On the other hand, have you tried changing the switchtype from national to euroisdn? It may help if your telco uses that type of switches, because the call setup info varies a little on each configuration. Cheers, -- Ing. Miguel Molina Grupo de Tecnología Millenium Phone Center Thanks for the replay Miguel, Looking at PRI debug I see a 2ed cause code being sent by the Telco after the "Number you dialed is not a working ....." recording, cause code 102. This over writes the first cause code 1. Thats why on hangup HANGUPCAUSE is set to 102. I am talking to the Telco to see if they can do something about this. Also reading through the archives on the subject of PRI & disconnected numbers I found a lot of discrepancy on how there handled and the cause codes sent. Steve Casto _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users