Hello, Everything I've read says that 3.3v 32bit cards will work in 64 bit slots, and the cards do fit, they just have some extra space left on the slot.
MATT--- -----Original Message----- From: WipeOut [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 13, 2004 3:15 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] 3.3v PCI board - TE410P photo Scott Stingel wrote: >Hi- > >I have posted a photo of the TE410P Digium card on my site, >so that those wishing to purchase a compatible motherboard >can see physically what the PCI slot requirement is: > >http://www.evtmedia.com/TE410P.htm > >I believe the required slot is a 64-bit, 3.3 Volt PCI, most >commonly found on Xeon-based motherboards. A 64-bit slot is >longer than the TE410P board requires, but the PCI connector >layout matches. > >CHECK YOUR BOARD CAREFULLY, not only the spec's, but a picture >of the PCI slots. I've seen some of the boards posted here do >not in actuality have compatible slots. > > > Looking at your photo the card is a 3.3v 32 bit card.. Unfortunately it does not liik like anyone has a board with a 3.3v 32bir, they all go straight to the 64bit slots which i guess is understandable.. Here is a page with some photos.. http://hsi.web.cern.ch/HSI/s-link/devices/s32pci64/slottypes.html Later.. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
