Alex Samad wrote: > Hi > > I have setup forwarding - xfering - where you press # and then the > extension. I add t to the dial cmd. > > My problem is that when you call something like internet banking they > want #, but when # is pressed asterisk gets it instead. is there a way > around this ? > > I haven't been able to get asterisk to listen to flash either > > > Alex > The easiest solution would probably be to look in features.conf and change the option for forwarding to require two consecutive # presses.
The other option would be to put an explicit dial rule for the numbers that need the # bypass and have them omit T and from the dial command. You could also set up a dat abase with a simple web front end for your users to enter numbers that need to have the transfer function bypassed and do something like this (I use AEL so this is in AEL Format) macro specialDial (ext) { if (${DB_EXISTS(bypass/${ext})}) { Dial (${TRUNK}/${ext}); // Dial without transfer } else { Dial (${TRUNK}/${ext},,T); // Dial With Transfer } } This is assuming you create a table called "Bypass" in your Asterisk Database and add the number to the database. Good luck, Brent _______________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users